Architectural Aluminium Powder Coating Mt D2525 Gloss Satin Matt - China

Product Description

MT-D2525 Gloss/ Satin/ Matt is a range of durable powder coatings specially formulated without of TGIC for use on architectural aluminium components.

MT-D2525 Gloss/ Satin/ Matt is designed to offer significantly higher gloss retention and resistance to colour change combined with maximum film integrity to ensure long term cosmetic and functional protection.

MT-D2525 Gloss/ Satin/ Matt typically meet the performance requirement of AAMA 2604 - and Qualicoat class 2 specifications.

All MT-D2525 Gloss/ Satin/ Matt powders are lead-free available in a selected range of color in full gloss such as high gloss, satin and matt finishes.

Powder Properties

Chemical Type Polyester

Gloss level (60°) Depend on the colour

Particle Size Suitable for electrostatic spray

Specific Gravity 1.2-1.75 g/cm³ depending on colour and effect

Storage Dry, cool conditions (open boxes must be resealed)

Shelf life 12 months below 30°C

Curing schedule

(at object temperature) 10 minutes at 200°C

Mechanical Tests

Flexibility ISO 1519 (cylindrical Mandrel) or ASTM D522 Pass 5mm

Adhesion ISO 2409 / ASTM D 3359 (2mm crosshatch) Pass Gt0

Erichsen cupping ISO 1520 Pass ≥3mm

Impact resistance ISO 6272 / ASTM D2784 Pass 2.5 Joules (reserve & direct) (20InP)

Pre-treatment

For maximum protection it is essential to pretreat components prior to the application of mt- D2525 - Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate.

Detailed advice should be sought from the pre-treatment supplier.

MT-D2525 products may also be used on cast or mild steel.

For outdoor use MT- PZ anti-corrosive primer over a correctly prepared substrate is recommended.

Application

MT-D2525 powders can be applied by manual or automatic electrostatic spray equipment.

For solid shades, unused powder can be reclaimed up to a maximum of 30% using suitable equipment and recycled through the system.

MT-D2525 powders should be applied at minimum 60µm.

All powders can show small color differences from batch to batch, this is normal and unavoidable.

Applicators and fabricators are advised to use a single batch for parts that will be assembled together.

Differences are more likely with special effect powders.

Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling.

A constant ratio between virgin and recycled powders should be fixed by the coater in order to achieve a consistent effect.

Products with different codes should not be mixed even if same colour and gloss.

If you're ready to take the next step, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.