Cellulose Ether Std20000s - China

Product Description

This product is developed to improve the workability of cement- or gypsum-based dry-mix mortars.

It can be used in plastering, painting, tile adhesives, and exterior wall insulation systems.

It provides excellent workability, stable air content, and good water retention.

The “S” mark indicates surface treatment and a certain degree of solubility.

For even better workability and excellent anti-sagging properties, it can be combined with other additives.

Specifications

Appearance: White to slightly yellow powder or granules; Analytical result: White to slightly yellow powder or granules.

Moisture: Minimum specification 0.0%, maximum 8.0%, Analytical result 3.3%.

Fineness (0.20 mm): Minimum specification 0.0%, maximum 5.0%, Analytical result 4.6%.

Viscosity (2%, 20℃, NDJ): Minimum specification 18000 mPa·s, maximum 30000 mPa·s, Analytical result 24520 mPa·s.

Storage

This product is designed to last for a long time.

It is recommended to be used on a first-in, first-out basis.

It should be stored in its original packaging in a dry, clean environment, away from heat sources.

This product is hydrophilic, and while the packaging can prevent moisture ingress to a certain extent, its moisture content may increase if stored in an unsuitable environment.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.