Ep Hybrid Powder Coating - China

Product description

It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the produced coating has excellent leveling, decorative, mechanical properties and strong corrosion resistance.

Application areas:

Widely used in the coating of various indoor metal products.

Physical properties:

1 - Specific gravity: 1.2-1.8 (depending on color and gloss) 2 - Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.

3 - Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Spraying area 8-12 m2/Kg, film thickness 70μm (100% powder usage rate)

Adhesion GB/T 9286 Grade 0

Impact GB/T 1732 50cm

Cupping test GB/T 9753 ≥ 6 mm

Bending test GB/T 6742 ≤ 3 mm

Pencil hardness GB/ 6739 ≥ H

Salt spray test GB/T 1771 1000 h passed

Moisture and heat resistance GB/T 1740 1000 h passed

Application instructions:

Surface treatment: Treat according to the substrate and required performance Spraying: Electrostatic gun or friction gun Film thickness: 60-70 um Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes Hygene & Safety:

This powder coating is a non-toxic product, but dust should be avoided during use.

Operators are advised to wear appropriate dust masks and glasses.

If possible, try to avoid long-term contact between skin and powder coating.

Safety & protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing.

Take measures to avoid skin contact.

If contact is necessary, wash the skin with water and soap.

If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time.

Ash layer and powder particle deposition should be avoided on the surface and dead corners.

Tiny organic particles will be ignited and explode under static electricity.

All equipment must be grounded to prevent static electricity.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.