Epoxy Polyester Powder Coatings With Antimicrobial Technology Mt 700 Am - China

Product description

MT-700 AM is a series of epoxy polyester hybrid powder coatings with antimicrobial technology.

MT-700 AM is offering an optimum combination of decorative and protective qualities and granting very high chemical and mechanical properties of the cured film.

These powders are commonly recommended for indoor usage.

MT-700 AM powders are available in the full range of colors in gloss, satin, textured, metallic and other special finishes or can be custom matched to the user’s requirements.

MT-700 AM is a high-quality powder coating designed to meet decorative and functional demands.

Additionally, MT-700 AM uses antimicrobial technology to reduce the number of microbes such as bacteria and mold.

Test results have proven reduction of bacteria and mold up to 99.9%.

Powder properties

Typical value

Chemical Type Epoxy-polyester

Density 1.2 – 1.7 g/cm³, depending on colour and effect

Recommended film thickness 60 – 90µm

Shelf life 24 months below 30 ºC

Storage Conditions Under dry, cool (≤ 30°C) conditions

(open boxes must be resealed) Curing schedule 15-20 min at 180°C

8-12 min at 190°C 5-7 min at 200°C Application

Powders can be applied by manual or automatic electrostatic spray equipment.

A good protection is linked with the recommended film thickness.

All powders can show small color differences from batch to batch, this is normal and unavoidable.

Applicators and fabricators are advised to use a single batch for parts that will be assembled together.

Differences are more likely with special effect powders.

Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling.

Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect.

Products with different codes should not be mixed even if same colour and gloss.

It is recommended that for consistent application and appearance product be fluidized during application.

Test conditions

Actual product performance will depend upon the circumstances under which the product is used.

The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only.

Pre-treatment Zinc Phosphate

Substrate Polished steel

Curing schedule

(Object Temperature) 6 min at 200°C (object temperature)

Film Thickness 60 – 70µm

Mechanical tests

Typical value Method/standard

Adhesion Class 0 ISO 2409 (2 mm Crosshatch)

Erichsen cupping Pass 7 mm ISO 1520

Flexibility Pass 3 mm ISO 1519

Impact resistance ≥30 kg.

cm ISO 6272-2 (d) If you're ready to take the next step, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.