Imitation Porcelain Light Luxury Home Decoration Powder - China

Introduction

This series of products adopts the new super-leveling technology.

The product has the surface effect of anti-porcelain swimming, soft gloss, smooth surface, delicate and smooth feel, and excellent impact performance.

The product is rich in color, not only can provide a highly decorative coating appearance, but also give people a comfortable imitation skin feel.

It can be applied to various indoor and outdoor fields such as doors and windows, furniture, hardware, aluminum profiles, etc., making the living environment more elegant and noble.

Scope of application:

High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.

Surface effect of anti-porcelain swimming coating The surface of the coating is delicate and smooth, and the feel is smooth Excellent adhesion through 50kg.

cm positive and negative impact Green and environmentally friendly, reducing costs Guide to use

Curing conditions:

210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.

Pretreatment:

The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007 - The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡.

The time interval between chemical conversion pretreatment and coating should not exceed 16 hours.

In principle, coating should be applied immediately after the conversion treatment is dry.

Workpiece hanging:

When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.

Powder spraying:

Choose reasonable process parameters, control the voltage, air pressure and powder output.

The powder spraying environment should preferably have a temperature and humidity control system.

The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.

The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.

During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness.

It is recommended that users conduct tests before use to achieve satisfactory results.

Performance index

Applicable surface Item Test standard Index

Powder performance State in container HG/T2006-2006 Uniform color, no foreign matter, loose powder

Sieve residue (125μm) HG/T2006-2006 All passed

Appearance of coating Adhesion GB/T9286 Grade 0

Impact resistance GB/T1173 Punch diameter: 16±0.3mm; pit depth 2.5±0.3mm, no peeling after tape pull test

Anti-cupping GB/T 9753 5mm

Bending resistance GB/T 6742 5mm No peeling after tape pull test

Chemical properties of coating Boiling water resistance GB5237.4 No shedding or wrinkling

Solvent resistance GB5237.4 Grade 3

Salt spray resistance GB/T10125 1000h, scribe line: unidirectional rust ≤4mm

Moisture and heat resistance GB/T1740 1000h, no blistering, shedding or other obvious changes

Coating weather resistance Accelerated weather resistance GB/T1865 Xenon lamp 800h, △E≤5 - gloss retention>50%

Natural weather resistance GB/T9276 Negotiated

Remarks: The accelerated aging requirements for bright color coatings such as black, yellow, and orange shall be agreed upon by both the supplier and the buyer and shall be stated in the contract.

Packaging and storage

The outer packaging of powder coating is a hard carton lined with a plastic bag, with a net weight of 25KG and 20KG per box.

It should be stored in an environment with a temperature below 25℃ and avoid exposure to light or heat.

The location where the powder is stored is not allowed to be close to fire and away from heat sources.

Safety measures

This product is non-flammable and explosive

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.