Mb Efficient Flexible Waterproof Slurry Paste Stirring Complex - China

Features: 1, can be used both in the positive and back water sides,

mixed with concrete, the effective age is the same to the structure.

2,

can be operated on the wet surface, finished after 48h can fill back, no

requirement for protective layer 3, can harsh the contraction crack

under 0.4mm, penetrate deep can be above 25cm, and the deepen with the

time changes, can stand the corrosion of aggressive groundwater, oxygen

ions, sulfate, nitrate, and protect the concrete and steel 4, detected

by the health inspection CHA department and the New York MDDH U.S. EPA

approved as non-toxic products, can be directly used for drinking and

food industry construction 5, no particular protection when filling back

or tying bar, strengthen network or other usual procedures.

6, when with

concrete, bricks, mortar and stone materials are in one hundred percent

compatible, and will not tear, puncture or break away from the joint

displacement Application: 1, waterproof projects for basements,

underground storages, parking places, underground consistent walls and

lift shaft grooves and so on 2, the concrete protection for seaports and

waterproof projects for reservoir, dams, bridges, driveways, and

carrying traffic structures 3, waterproof projects for kitchens, drinking-

water tanks, sewage treatment pounds and sewage channels Waterproof

Principle: Adopting the technology from America nuclear industry,

starting from molecular physics, making research about the interaction

and the movement of the molecule, introducing the concept of alike

molecular sieve and infiltration crystallization, making the waterproof

materials hold the molecular sieve, gaining the effect of breathable

while prevent water, and ensure the waterproof layer own high anti-

infiltration function.

This material is based on cement, so it can bond

with concrete effectively and with the inorganic substance which can

make silicate lattice change and re-crystallization, it can perpetrate

into the concrete surface, and this can not only improve the waterproof

layer the adhesion towards structure body, but also improve the function

of anti-infiltration.

Thanks to the infiltration crystallization of the

inorganic, under the water and inorganic substance, the silicate lattice

can formulate new crystal along the crack so as to harsh the pipe.

Similarly, when the waterproof layer makes crack by external damage, the

insider skeletal material crystal lattice under water and inorganic

substance will make change and re-crystallized to harsh the crack gain

the effect of self-repair.

Operation Process: 1, clean and moist the

surface before operation, try to keep it under saturation state 2,

ratio: powder: additive: water=25kg: 18kg: 1kg, mix them with electric

mixer evenly (about 3~5min) 3, wipe out the obvious water of the

surface, clean the edge and other complex parts, then smooth the

surface, pay attention to the brushing direction, brushing

alternatively, after one layer dry then make the second time, 3~4 times

are the basic need in order to meet the requirement.

For the special

parts, cover non-woven fiberglass or fiber Normal Amount: 1, for civil

buildings, brush three times, thickness about 1.2~1.5mm, according to

the surface, about 17~25m2/set 2, huge projects as metros, tunnels, dams

brush 4~5 times, thickness 2~3mm, according to the surface, about

10~15m2/set Technical Reference: Permeability intensity

(28d≥1.2MPa) Second time for permeability intensity

(28d≥0.8MPa) Flexural strength Under pressure

1.5Mpa 1.2MPa 7d: 4.6Mpa

28d: 5.5MPa 7d: 21Mpa

28d: 27MPa

Under pressure ≥1.0MPa Bond strength

≥1.8MPa Elongation

80% Permeable pressure ratio

≥300%

1.3MPa 3.5MPa 95% 325%

Cautions:

1, do not mixes too much, take half-hour use as the standard

2, for a better effect, do not operate under -5℃ or particularly damp and unventilated situation

3, this is an undecorated material, for pedestrian traffic in the base above the overlay layer of protection is required

4, once MB additives stained on skin wash with clear water, if the slurry splashed into eyes rinse with water and then sent to the hospital for treatment in time

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

25kg powder + 18kg additive /set, 25kg powder + 20kg additive/set

Mebong Lacquer Putty Series:

Page 15

MB-06 Base Lacquer Putty:

Features:

This product is a new high-strength coating bottom ash, mainly used for the leveling rough surface of cement mortar or concrete walls, providing a good base surface for the layer lacquer putty, to reducing the amount of surface lacquer putty and low down the project cost

1, strong cohesive force, can be well attached to the base surface

2, has a certain flexibility, can be a good buffer layer for different substrates of stretching stress

3, excellent aging resistance and good ability of anti-infiltration

4, environmental-friendly product, non-toxic, and safety

Surface Treatment:

The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.

New plaster surface should maintenance about twelve days before inserting the lacquer putty, do not use cement paste for calendaring.

If the wall is too dry, wet the wall before operation till there is no obvious water on the surface

Operation Process:

1, using appropriate amount of water (about 3: 1) to transfer it into a paste (namely 25kg powder + 7.5kg water)

2, according to the water-cement ratio, pouring the water into the stirring barrel, adding the powder, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect

3, using point-mending method to repair the base side for those large different places, after dry use a spatula evenly to spread the slurry on the base surface, and control the thickness under 2mm.

4, dry after 24h, can make the operation of the surface lacquer putty.

Technical Reference:

Compression and shear bond strength≥1.2MPa original tensile strength≥0.6MPa Waterproof tensile strength≥0.5MPa

Tensile strength resistance to freezing and thawing≥0.5MPa Tensile strength of alkali ≥0.5MPa Heat-tensile bond strength≥0.5MPa

Normal Amount:

about 1.5~2.0kg/m2, according to the smooth of the surface

Cautions:

1, never mix the dry slurry with water and use again

2, this product requiring operating under 5℃~40℃ situation, never operate under raining.

Store Method:

Store in cool and dry place, unopened product can be saved for one year.

Packing:

2kg/bag, 25kg/bag

Mb Efficient Flexible Waterproof Slurry

Feel free to contact us with all your questions

Company Contact:

• Posted By: Guangzhou Mebong Architectural Decoration Co., Ltd

• Phone: 8613288806122

• Address: Room A601,Yangcheng Garden No. 438, zhongshan Road, Guangzhou , Guangdong China , China

• Email:

• Business Description: Guangzhou Mebong Architectural Decoration Co., Ltd. is a multi functional dry mortar manufacturer that is specialized in technical research, production, sale and service.
  
  Our business covers the whole country and the whole world.
  
  Mebong is the first to introduce the U.S. advanced dry mortar production technology and equipment in China, and provides new type environmentally friendly dry mortar products and advanced construction technology, aiming at making outstanding contributions to future industrial production and people's lives.
  
  "High quality and excellent service" has always been the goal of Mebong.
  
  In order to achieve the commitment of "providing good products and service for customers", Mebong has produced stable, lifelong, convenient and environmentally friendly dry mortar series products according to different environments and different needs.
  
  Mebong mortar has passed the national tests, and is in accordance with ISO9001: 2000 quality management system standards.
  
  For the future, Mebong will focus on the cooperation with partners in the field, and maintain the leading position in the international development strategy.
  
  We firmly believe that our company is bound to bring business partners good business opportunities and profits.
  
  Mebong would like to peer with the majority of construction materials to create another new field of the construction world.