Mdf Medium Density Fiberboard Powder Coating Std - China

Product Description

This product is a powder coating suitable for medium density fiberboard substrate (MDF) coating produced by special formula and production process.

The coating film has excellent mechanical properties and indoor decorative properties, and can be widely used in surface treatment of modern furniture industry.

It is generally not recommended to be used directly for surface coating of various outdoor products.

Application Field

It can be widely used in surface treatment of modern furniture industry.

Product Features

The powder coating has high utilization rate during construction;

No three waste problems, in line with environmental protection requirements;

Compared with traditional spray painting and film pressing process, it has lower cost;

It has stronger adaptability to product switching than film pressing process, and can adopt large-scale industrial production methods;

The coating film has excellent physical and chemical properties;

Different coating film appearance effects can be designed.

Transport packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg.

Non-hazardous items can be transported in various ways, but should be avoided from direct sunlight, moisture and heat, and contact with chemicals.

Powder coating

Specific gravity 1.15~1.8g/cm° (depending on the color and gloss)

Particle size 100% less than 100 microns (can be adjusted according to the special requirements of the coating)

Powder fluidity 140-150

Construction process 1 - ​​Electrostatic spray gun can be used for coating, and the film thickness is suitable to be controlled at 70-90 microns.

(MDF substrate needs to be heated and homogenized in an infrared oven in advance and preheated.

The specific heating temperature is determined according to the heat capacity of the MDF substrate.

)

2 - Curing conditions: 140℃, 5-8 minutes (referring to the surface temperature of the MDF board).

The oven can use an ordinary hot air circulation oven or a drying tunnel.

If conditions permit, it is best to use an infrared oven to quickly heat and level the newly sprayed coating, and then send it to an ordinary oven for baking and curing.

If you're ready to take the next step, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.