Methyl Isoamyl Ketone Miak - China

Applications

.

Auto oem .

Auto refinish .

General industrial coatings .

Paints & coatings .

Process solvents Key Attributes

.

Excellent solvent activity .

High dilution ratio .

Inert – Nonfood use .

Low density .

Low surface tension .

Non-HAP .

Non-SARA .

REACH compliant .

Readily biodegradable .

Slow evaporation rate .

Urethane grade Product

MT-MIAK (Methyl Isoamyl Ketone) has high solvent activity, slow evaporation rate, low density, low surface tension, and a high boiling point.

These properties make MIAK a very good solvent for high-solids coatings.

Because regulations limit the weight of solvent per gallon of coating, formulators favor the use of low-density solvents that help reduce the VOC content of a coating.

MIAK is lower in density than ester, aromatic hydrocarbons, and glycol ether solvents with similar evaporation rates.

The low density and high activity of MIAK are significant advantages when formulating low-viscosity, high-solids coatings.

In addition, MIAK is useful as a polymerization solvent for high solids acrylic resins.

Typical Properties

Property Typical Value, Units

General Acidity

as Acetic Acid 0.01 wt % max.

Assay 98.5 wt % min.

Autoignition Temperature 424 °C (795 °F)

Azeotropes

BP 94.7 °C (202.5 °F) Wt % Water 44 wt %

Blush Resistance

@ 80°F (26.7°C) 89 % RH

Boiling Point @ 760 mm Hg

Dry Point Initial 148 °C (298 °F) 141 °C (286 °F) Color

Pt-Co 10 max.

Critical Pressure 29.3 ATM

Critical Temperature 327.8 °C

Critical Volume 421 ml/g·mol

Dilution Ratio

Toluene VMP Naphtha 4.1 1.2 Electrical Resistance 0.6 Megohms

Empirical Formula C7H14O

Evaporation Rate

(ether = 1) (n-butyl acetate = 1) 24.20.5

Expansion Coefficient, per °C @ 20°C 0.00107

Flash Point

Tag Closed Cup 36 °C (96 °F)

Freezing Point -74 °C (-101 °F)

Hansen Solubility Parameters

Hydrogen Bonding Nonpolar Polar Total 2 7.6 2.8 8.3 Heat of Combustion -979.9 kcal/g·mol

Heat of Vaporization 9186 cal/g·mol

Liquid Heat Capacity @ 25°C 59.64 cal/(g*mol)(°C)

Liquid Viscosity

@ 25°C 0.7 cP (mPa·s)

Molecular Weight 114.19

Nitrocellulose Solubility Active

Refractive Index @ 20°C 1.4078

Solubility

in Water, @ 20°C Water in, @ 20°C 0.5 wt % 1.2 wt % Specific Gravity

@ 20°C/20°C 0.813

Surface Tension

@ 20°C 25.8 dynes/cm TLV PPM 1998 50

Vapor Density

(air = 1) 3.9 Vapor Pressure

@ 20°C @ 55°C 4.5 mm Hg 3.7 kPa Wt/Vol

@ 20°C 0.81 kg/L (6.76 lb/gal)

Comments

The properties reported here are typical values for an average batch.

There is no guarantee that material from any particular batch will exactly conform to the values given.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.