Sports Equipment Powder - China

Introduction

Accurate selection of powder has always been a problem for the powder industry.

To solve this problem, we name the powder according to the industry’s requirements for powder coatings.

We select materials for different industries and make corresponding adjustments to the process to better match the industry’s requirements.

We provide customers with high-quality and low-cost products that are easy to use.

Product name Sports equipment powder

Applicable industries Indoor and outdoor sports goods, stadium pillars, fences, sports and fitness equipment, etc.

Powder specific gravity 1.2-1.8ɡ/cm³

Product features Suitable for aluminum, iron, galvanized and other substrates.

Suitable for brushing, sandblasting and other substrate treatments.

Wear-resistant, bright colors, good gloss and color retention.

Physical properties Bending ASTM D522 Passed-curvature diameter is 5mm.

GB/T1731 Passed-curvature diameter is 2mm.

Dry adhesion ASTM D3359 Passed-result is 5B.

ISO 2409 Passed-result is 0 grade.

GB/T9286 Passed-result is 0 grade.

Cupping ISO 1520 Passed 5mm-No cracking or shedding of coating.

GB/T9753 Passed 5mm-No cracking or shedding of coating.

Impact resistance (positive impact) ASTM D2794 ≥50kg.

cm

GB/T9753 50kg.

cm

Pencil hardness (scratch hardness) ASTM D3363 ≥2H

GB/T6739 ≥2H

Storage stability 12 months (less than 30℃ environment) .

Re-test after expiration.

If it meets the requirements, it can be used at will.

Curing process 200℃/12min, 180℃/15min (workpiece surface temperature).

Pretreatment All metal substrates need to be degreased and degreased, iron metals are treated with zinc or iron phosphating and aluminum chromium to improve corrosion resistance.

Coating Manual or automatic spraying equipment can be used.

To ensure the consistency of the coating, automatic spraying equipment is recommended.

Unsprayed powder can be recycled through an appropriate recycling system.

Atomizing air pressure ∽0.5 bar, primary air ∽0.5 bar, spraying voltage 40-90kv.

Damage repair Surface treatment: Grinding + air cleaning.

Application: Recoating mode, reduce spraying voltage.

Safety Warning When spraying, do not eat, drink or smoke, and avoid inhalation of dust.

Wear a suitable breathing mask.

For more information, please ask the salesperson for the material safety data sheet of the specific product for reference.

Disclaimer Important note: The information provided in this table cannot be comprehensive and is based on current laws and current knowledge.

Anyone who intends to use the product in areas other than those recommended in this table without first obtaining written confirmation from us of the product’s suitability will bear the consequences.

It is the user’s unshirkable responsibility to take necessary measures to meet local legal and regulatory requirements.

Please continue to read the material safety data sheet and technical parameter sheet of our products when you have time.

We try our best to ensure that all the instructions for our products (in or outside the table) are correct, but we cannot fully control the quality or condition of the substrate and the many factors that may affect the use of the product.

Therefore, unless we specifically confirm in writing, we do not assume any responsibility for loss of product performance and any other loss or damage caused by the use of the product.

All products and technical recommendations we provide are subject to our standard terms and conditions of sale.

Please obtain a copy of this document and read it carefully.

The content of this table will be supplemented and improved as we accumulate experience and update policies.

Before using the product, the user should verify whether the data in this table is the latest.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.