Valves And Pipes Powder Coating - China

Introduction

The main components are epoxy resin and curing agent.

Brief description

It is mainly composed of epoxy resin and curing agent.

Features

Excellent mechanical properties (impact resistance, hardness, toughness, adhesion, etc.

)

Good coating surface effect

Strong corrosion resistance

Good insulation

Application areas

Mechanical and electrical equipment, safes, industrial equipment, pipelines, steel wires, chemical laboratory equipment and other anti-corrosion fields Product series

Standard curing type and low temperature curing type are available Can be made into various glosses and colors Can be made into hot melt epoxy Technical parameters

Powder performance

Specific gravity: 1.1~1.8g/cm³ Corrosion resistance

Test items Test standards Performance indicators

Salt spray resistance GB/T1771-91 No change in coating after 1000 hours, unilateral corrosion at scratches <2mm

​Moisture and heat resistance GB/T1740-79 Slight gloss loss after 1000 hours, ≤1 level

Note: The above parameters are laboratory data and are for reference only.

The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Application conditions

Pretreatment: phosphating, chromating, sandblasting Coating: Suitable for corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed dipping Curing conditions: 200℃ at 10 minutes 180℃ at 15 minutes Can also be designed according to customer needs Drinking water product certification

British WRA5 standard US NSF61 standard German KTW/W270 standard Drinking water valve testing standards: BS/EN14901 - ANSI/NSF61 Packaging

Carton packaging, net weight 20kg/box Lined with double-layer polyethylene plastic bags Storage conditions

Store in a dry and ventilated room below 30℃ Avoid direct sunlight Under this condition, the powder can be stably stored for 6 months Safety and health

All raw materials of powder coatings do not contain toxic substances.

No toxic gas is released during baking.

Avoid inhalation of dust during use.

Operators should wear dust masks.

Minimize long-term contact between skin and powder.

Paint attached to the skin can be washed with soap.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.