16e1 To Ethernet Converter - China

The 16E1/Ethernet converter provide 16E1 ports, 4 ethernet ports.

double

power support AC220V+DC48V.

Providing super terminal or SNMP management.

Baudcom's 16E1 to Ethernet LAN converter realize Ethernet transparent

transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s.

Functions

Baudcom’s 16E1/Ethernet converter realize Ethernet transparent transmission over 1~16E1 with maximum transmit rate of 31.68Mb/s.

The converter adopts with international standard protocol (G.

7041, G.

7042, G.

7043, G.

8040) at all layers and able to intercommunicate with other supplier’s products followed the same standard.

The device not only provides perfect alarm/status indication for E1 and Ethernet interface, but also with senior management function such as Ethernet data traffic statistics etc.

The device is with high integration, low power consumption, stable performance and easy to use.

Features

Realize Ethernet data transmission over 1~16E1

Support auto delete the fault E1 channels (BER more than 1E-6 or a serious warning LOS/AIS/LOF or the signal loop back); Auto-restore the use of E1 after eliminate the failure.

For 16 E1 channels, the maximum tolerable time delay difference between any two can be up to 220ms.

It will have an alarm for exceed the limit when the time delay difference over 220ms, meanwhile, business interrupt jitter tolerance, jitter transfer characteristics in the line with ITU-T G.

823 -

Provide 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE 802.1Q standard

Provide 1024 pieces MAC address table, 5 minutes aging time

Support frame length: minimum: 64 bytes, maximum: 1916 bytes.

Provide flux statistics for each Ethernet interface, such as the fault package number and total package number etc.

Provide PAUSE flux control function, can be equipped with network management.

Support trunk super terminal management or network management based on SNMP.

(optional)

Specifications:

E1 Interface

Line Rate: 2.048Mbps±50ppm

Line Code : HDB3

Interface Standard: ITU-T G.

703

E1 Impedance: 75Ω(unbalance)

Connections : dual coax BNC

Jitter tolerance : finer than G.

742 and G.

823

10/100Base-T Interface

Rate: 10/100M, full/duplex auto-negotiation

Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Entiries: 4096 Entiries

Total Memory Sizes: 64MBits SDRAM

Physical interface: RJ45, support AUTO-MDIX

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

DC-48V, range DC-36V~DC-72C

AC220V, range AC165V~AC240V

environment condition

Operating temperature: 0C~+50 C

Storage temperature: -20 C~+70 C

Relative temperature: 95% (uncondensed)

Company Contact:

• Posted By: Shanghai Baudcom Communication Device Co,.Ltd

• Phone: 862137709251

• Address: 519A,BuildingA,Lianming RD 389,Minhang District,Shanghai, Shanghai , China

• Email:

• Business Description: Shanghai Baudcom Communication Device Co., Ltd. is the leading
  
  manufactures and exporters from Shanghai, China.
  
  It is a high tech
  
  company that specializes in researching, developing, manufacturing and
  
  marketing data communication products.
  
  Baudcom products include 10/100M Managed Media Converter, 10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer, Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer, E1/V35/RS232 Fiber modems, voic10/100M+V.
  
  35/4E1/RS23 2/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter, V.
  
  35 to 10/100M converter, E1/V35/Ethernet G.
  
  SHDSL modem, TDM over IP, 8/16 channels CWDM platform, SFP modules, SFF transceiver, 1x9 transceiver and so on.