Frp Pipe - China

Zhongyi FRP Co., Ltd manufactures filament wound pipe, pipe fittings and

flanges of different diameter in accordance with standards published by

ASTM, ANSI, AWWA, ASME .

Pipe, pipe fittings and flanges are

manufactured from corrosion resistant epoxy vinyl ester, polyester,

isophthalic resins.

Pipes & ducts

Pipes & ducts are manufactured using the "Dual helix" filament winding process on computer controlled machines.

By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound.

In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall.

Nominal diameter

Nominal size of pipe and fitting is based on internal diameter.

The range of available sizes is 25 to 3000 mm.

Nominal pressure classes:

Pipes and fittings are classified according to nominal pressure.

Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars.

Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions

Nominal lengths

Pipes have a length of six meters up to ND150 and 12 meters for bigger diameters.

Fittings

A wide range of fittings as elbows, reducers, tees, caps, flanges etc.

is available.

Fittings are manufactured by the hand lay-up, contact molding and spray-up process.

In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold.

In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface

Prefabrication spools

Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.

Please see our contact information below

Company Contact:

• Posted By: ZHONGYI FRP CO.,LTD.

• Phone: 008613930101915

• Address: NO.955 Xinghua South Street, Jizhou , China

• Email:

• Website: http://www.zhongyifrp.com

• Business Description: Established in 1986 , Zhongyi FRP Co., Ltd has worked closely with its customers and suppliers to develop better ways to eliminate corrosion and process problems found in industry, Founded by a group of technical, administrative, and practical individuals, Zhongyi FRP Co., Ltd quickly gained the confidence and respect of engineering, purchasing, and contracting individuals throughout China and abroad.
  
  Zhongyi FRP Co., Ltd has the packaged ability to design, fabricate and install all of its products.
  
  The major customers we serve are in the following industries:
  
  Civil engineering
  
  Pulp and Paper
  
  Mining
  
  Chemical Processing
  
  Water Treatment Facilities
  
  Oil and Gas
  
  Foodstuff and beverage
  
  Zhongyi FRP Co., Ltd manufactures fiberglass reinforced plastic (FRP) pipe and fittings, duct, stacks, hoods and covers, Storage Tanks, Reaction vessels, Gas Scrubber, absorber, grating and platforms, pultruded structural shapes and many other custom items.
  
  With the use of computer controlled manufacturing equipment we have been able to both sustain a high level of product quality and remain flexible for ever changing industry requirements.
  
  Zhongyi FRP Co., Ltdis committed to Total Quality Management and conforms to the international ISO 9001 & ISO14000 standards