Iirrigation Pipes Fittings For Pressure Irrigation Systems - Turkey

ın sprinkler or overhead irrigation, water is piped to one or more

central locations within the field and distributed by overhead high-

pressure sprinklers or guns.

The water travels through pipes from the

water source through the valves to the sprinklers.

The pipes from the

water source up to the irrigation valves are called 'mainlines' and the

lines from the valves to the sprinklers are called 'lateral lines'.

Sprinkler guns mounted overhead on permanently installed risers and

rotate in a full or partial circle with high pressure in field.

Most

piping used in irrigation systems today are HDPE.

Düzgünler sprinkler

irrigation system pipes produced as 5 meters and 6 meters length for PN5

working pressure.

Other lengths can produced upon request.

Duzgunler Sprinkler Irrigation System Pipes are;

*Durable, non-corrosion and long life,

*Resistance for chemicals and sun light,

*Light weight, Flexible and unbreakable ,

*Easy installation and handling in fields,

*Stop soil erosion,

*Low labor cost and operation cost,

*Soluble fertilizers can be added without workmanship during the irrigaton,

*High productivity, more crops.

(at least % 50)

*Water saves, provides efficient water usage.

Paying attention to installation sprinkler irrigation systems;

*The main pipe line should be installed in accordance with the dominant inclination.

*Sprinkler laterals should be installed vertical to dominant inclination and to the possible extent parallel to the contour lines.

*In places where wind forces are high laterals should be so installed as to meet the winds vertically.

*Use of very long laterals should be discouraged.

Shorter laterals generally ensure homogenous water distribution and saving workmanship.

*In order to ensure minmum lateral movement and changes in the quantity of the sprinklers which operate jointly and harmoniously, the area to be served must be arranged in square or regtangle to the possible extent.

*In case where more than one lateral must operate simultaneously diameters of the laterals should preferably be equal or two different sizes maximum.

-Each pipe is produced in 5m.

or 6 m.

length

Avaliable Diameters:

Metric (mm)

50

63

75

90

110

125

140

160

-Avaliable Fittings

-Tee

-Elbow

-Reducer Coupling

-End Cap

Iirrigation Pipes Fittings For Pressure Irrigation Systems

Feel free to contact us with all your questions

Company Contact:

• Posted By: Duzgunler Machinery&Plastic Co. Ltd.

• Phone: 903322391112

• Address: 3. Org. San. Bol. 3. Sok No:12, Konya , Turkey

• Email:

• Website: http://www.duzgunlermak.com.tr

• Business Description: involved in international trade import export of goods, products, and services