35kv Three Phase Oil Immersed No Load Power Transformer - China

The product conforms to the technical parameters and

requirements of China National Standard GB1094 and GB/T6451,

and a series of significant innovations are applied in

aspects of material, design and structure.

It features high efficiency and low loss.

It can save a lot

of operation cost, and has significant social benefits.

In

conclusion, it is a nationally promoted new product that

deeply favored by customers.

Installation type: indoor/outdoor type

Ambient temperature: -25C ~ +40C

Altitude: ≦1000m

Installation site: in places without corrosive gases and

obvious dusts

a.

Iron core using cold-rolled, grain orientation, low loss,

high permeability of high)grade silicon steel.

Thickness≤0.3mm, 45 C sloping seam lamination method to

ensure the low loss, low noise, core surface coated with

paint, moisture, rust.

b.

High)voltage winding adopts interleaved coil or full

resolution continuous coil, improve the impulse voltage wave

distribution, ensure the high)voltage insulation intensity,

HV and LV winging adopts high strength semihard oxygen-free

copper, the structure is Continuous or screw-type.

High-

voltage winding adopts strengthened cooling insulation

structure to ensure the temperature rising and the structure

design is reasonable, ampere turn's distribution unbalance,

small leakage, thus ensuring the coil's anti-short circuit

ability and overload ability.

c.

In coils dry process with constant pressure in the axial

direction to make the coil height stable

d.

Coils and iron construction use voltage transformation

vacuum dry and vacuum filling technology

e.

Conservator is capsule sealed type, which make the

internal running oil to isolate with the outside and

effectively prevent the entering of the oxygen and water

caused insulation performance decline.

f.

Protection devices include pressure relief valve,

temperature measurement equipment and oil level indicator.

Company Contact:

• Posted By: Shanghai Delexi Group Co., Ltd

• Phone: 57762763788

• Address: No. 9399, Tsing Gong Rd, Shanghai , China

• Email:

• Website: http://www.delixi-sh.com/

• Business Description: Shanghai Delixi locates in the Qingpu District of Shanghai, which is
  
  famous for the beautiful scenes.
  
  It is the wholly owned subsidiary
  
  company invested by China&e642; Delixi in November 1998 - Shanghai Delixi
  
  Group has the plant area of 800, 000 square meters, with registered
  
  capital of USD 25 millions, total investment of USD 460 millions and
  
  brand intangible value of USD 380 millions.
  
  It has 5 manufacturing
  
  factories and 2 joint ventures, and the employees are approximately
  
  1, 500 people.
  
  It is a large company in manufacturing HV, MV and LV
  
  transmitting,