Cc1120 Mcu Wireless Module 170 433 868 915mhz Fsk - China

CC1120 is a fully integrated single-chip radio transceiver, this radio

transceiver designed for use in cost-effective wireless systems low

power and low voltage operation to achieve high performance.

All filters

have been integrated, so no expensive external surface acoustic wave

(SAW) and intermediate frequency (IF) filters.

The device is mainly used

for ISM (industrial, scientific and medical) applications as well as in

the 164-192MHz , 410-480MHz and 820-960MHz on the SRD (Short Range

Device) frequency bands.

CC1120 provides extensive hardware to support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake on radio.

CC1120 main operating parameters via serial peripheral interface (SPI) interface.

In a typical system, CC1120 will work with a microcontroller and minimal external passive components used in conjunction.

F212 uses a high-performance 32-bit MCU development of RF transceiver modules, integrated USB interface, can be directly through the computer's USB to serial port functionality for RF transceiver, suitable for notebook and a variety of desktop computers, can be applied to a variety of industrial applications.

Performance description:

Adjacent channel selectivity: 12.5kHz offset to 65dB

Blocking performance: 10MHz 90dB when

Excellent receiver sensitivity:

1.2kbps when 123dBm

50kbps when 110dBm

127dBm using the built-coding gain

RX: RX sniffer mode is 2mA

RX: In low-power mode, the peak current of 17mA

RX: In high-performance mode, the peak current of 22 mA

TX: 45mA +14 dBm

Power down mode: 0.3μA

Supported modulation formats : 2-FSK , 2-GFSK, 4 -

FSK , 4-GFSK, MSK, OOK

Applications

12.5kHz channel spacing as low as ultra-low-power narrow-band radio system

170/315/433/868/915/95 0MHz ISM / SRD band

Wireless metering and wireless smart grid (AMR and AMI)

IEEE 802.15.4g system

Home and building automation

Wireless alarm and security systems

Industrial monitoring and control

Wireless Medical Applications

Wireless sensor networks and active radio frequency identification (RFID)

Private mobile radio

Module Description

Integrated USB interface

USB-powered

Support narrowband

Anti-jamming capability enhancement module

Operating voltage 5V

Operating current 80mA

Operating temperature: -40 +80 ° C

Company Contact:

• Posted By: SHENZHEN NANCHENG TECHNOLOGY CO.,LTD

• Phone: 008613632859553

• Address: SHENZHEN CHINA, SHENZHEN , China

• Email:

• Website: https://www.hkulike.com

• Business Description: Shenzhen NanCheng Technology CO., Ltd is a leading designer and
  
  developer of RF Module for remote monitoring and control applications
  
  and products that generally require both ultra low power consumption and
  
  long range connections.
  
  We mainly provide wireless transceiver modules working frequency under 1GHz and 2.4GHz, Zigbee modules and WMRNET, a wireless network, its most important character is that all RF module nodes work not only as Access Points (AP) but also as routers.
  
  Every node can send and receive the information and communicate with one or several other peer nodes.
  
  Our partners widely applied these RF modules to the kilowatt hour meter reading, home automation, sensor data capture in embedded systems, barcode scanning&POS systems, fleet management&asset tracking, telemetry and so on!
  
  NanCheng, concentrating on the development of wireless transceiver modules for a long time, is the ADI short range transceivers third party developer and we are keeping a close touch with this innovative company!Our products are exported to many countries, like the USA in North America, Argentina in South America, South Africa in the continent of Africa and etc.
  
  OEM/ODM orders are welcome too!
  
  We hope NanCheng can have a good cooperation with all the company to reach win win and mutual benefit.