Surface Roughness Tester Srt 6200 - China

This instrument is compatible with four standards of ISO, DIN, ANSI and

JIS and is widely used in production site to measure surface roughness

of various machinery-processed parts, calculate corresponding parameters

according to selected measuring condition sand clearly display all

measurement parameters.

When measuring the roughness of a surface, the

sensor is placed on the surface and then uniformly slides along the

surface by driving the mechanism inside the tester.

The sensor gets the

surface roughness by the sharp built-in probe.

This roughness causes

displacement of the probe which results in change of inductive amount of

induction coils so as to generate analogue signal, which is in

proportion to the surface roughness at output end of phase-sensitive

rectifier.

The exclusive DSP processes and calculates and then outputs

the measurement results on LCD.

* Very easy to operate * Multiple parameter measurement: Ra, Rz

* Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use

* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.

*Manual or automatic shut down.

The tester can be switched off by pressing the Power key at any time.

On the other hand, the tester will power itself off about 5 minutes after the last key operation.

2．SPECIFICATION S

Display 4 digits, 10 mm LCD, with blue backlight

Parameters: Ra, Rz

Display Range Ra: 0.05-10.00um/1.000-400.0u inch Rz: 0.020-100.0um/0.780-4000u inch

Accuracy: Not more than 10%

Fluctuation of display value: Not more than 6%

Sensor: Test Principle: Inductance type Radius of Probe Pin: 10um

Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf)

Probe Angle: 90° Vertical Radius of Guiding Head: 48mm

Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm /0.8mm /2.5mm optional

Evaluation length: 1~5 cut off optional

Resolution : 0.001μm if reading ＜10μm

0.01μm if 10μm≤reading&# 65308;100μm

0.1μm if reading ≥100μm

Power Li-ion battery: rechargeable

Attachment:

Standard Sensor RP-100 Groove Stylus SRP-110 curvature Probe SRP-120

Extension Rod SER-150 Measurement Stand SRS-1 Bluetooth interface

Standard Sample Plate SSP-180 Cable and Software for RS-232/USB

Surface Roughness Tester Srt 6200

Thank you in advance for your consideration

Company Contact:

• Posted By: Guangzhou Landtek Instruments Co. Ltd

• Phone: 86-020-81609313

• Address: Flat C,Kengkou Electronic Base,No.9 Huaxi Rd.Fangc, guangzhou , China

• Email:

• Website: https://www.landteknet.com

• Business Description: Guangzhou Landtek Instruments Co.
  
  Ltd. is one of leading professional manufacturers of meters and instruments in China.
  
  They have a team of dedication, high level education, cooperation and strong creativity.
  
  They always apply the advanced contemporary techniques and experience to their new products.
  
  Our instruments are of both high quality and high ratio of performance to price so that products are salable to world wide market.
  
  Quality first and user uppermost are one of our claims.
  
  Our Instruments strive for best in quality and after sale service.
  
  Satisfying your needs are our wishes.