Wt2080 Led Power Driver Tester For Ac Dc Input And Output Voltage Current F - China

WT2080 LED Power Driver Test Instrument is the comprehensive

test instrument for LED drive power which is according to GB/ T

24825- 2009 and IEC 62384: 2006 - It can measure the following

parameters: Input Characteristics Test ( AC& DC) , Output

Characteristics Test ( AC& DC) , Output Start Characteristics Test

( DC) and Harmonic Testing.

Specification:

1 - Input Characteristics Test ( AC)

• To measure the input voltage, current, power, power

factor, power grid frequency

• The fundamental frequency scope of the current and

voltage: 45Hz~65Hz; Narrowband range: 45Hz~5kHz; Broadband

range: 45Hz~1MHz.

• Voltage range: 3~300 V ( CF=1.67) ; Current range: 5mA ~

2.7A ( CF=3) ; Power range: 0.015~800 W; Power factor range:

0.000~1.000.

2 - Input Characteristics Test ( DC)

• Measuring voltage, current, power.

• Voltage range: 3~500V; Current range: 5mA~8A; Power range:

0.015~4000W

3 - Output Characteristics Test ( AC)

• Measuring lamp voltage, lamp current, lamp power.

• Lamp voltage range: 3~300V ( CF=3) ; Lamp current range:

5mA~2.7A( CF=3) ; Lamp power range: 0.015~800W

4 - Output Characteristics Test ( DC)

• Measuring output lamp voltage, lamp current, lamp power,

ripple wave current.

0.015~4KW; Ripple wave current range: 5mA~2.5A.

5 - Output Start Characteristics Test ( DC)

• Change curve and data of the measuring lamp voltage and

lamp current within 0~2 seconds.

• Lamp voltage range: 3~500V; Lamp current range: 5mA~8A

6 - Harmonic Testing

Total harmonic and the harmonic component of 0~50 times,

wave ratio, initial phase angle, peak phase angle, the phase

Angle

Company Contact:

• Posted By: Lisun Electronics (Shanghai) Co., Ltd.

• Phone: +8618917996096

• Address: 113-114, No.1 Building, Nanxiang Zhidi Industry Pa, Shanghai , China

• Email:

• Website: https://www.lisungroup.com

• Business Description: Lisun Electronics Inc was found by LISUN GROUP in 2003 - We have sales and service offices in China, Russia, India and Korea.
  
  In 2012, we built a high level products show room and accreditation lab in Shanghai.
  
  LISUN has setup a new manufactory in China to design & produce the lighting and electrical test instruments.
  
  Its quality system has been strictly certified by ISO9001: 2015 - As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards.
  
  All products passed CE certificate and authenticated by the third party lab.
  
  Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, LED Test Instruments, CFL Test Instruments, Photometer and Colorimeter, EMC & EMI Testing, Surge Generator, Electrical Safety Testing, Environmental Test Chamber, IP Waterproof Test Equipment, Dustproof Test Chamber, High and Low temperature Humidity Chamber, Plug and Switch Testing, AC and DC Power Supply.
  
  LISUN products have been sold to more than 150 countries and regions all over the world.
  
  Its quality is well accepted by many world famous companies such as UL, SGS, NIST, NIM, UNDP, Philips, OSRAM and so on.
  
  LISUN wins thousands of customers trust with motto “Right Product, Right Price and Right Service”.
  
  We will continue presenting more and more high quality products to our customers in the future.