X Ray Pipeline Crawler Motor Achieve 1150 - China

Micro-wave video X-ray pipeline crawler Features: 1 X-ray Generator

system has a regulatory function of KV with large diameter and thick

walled tube has the regulatory function.

Tran illumination to ensure the

X-ray film and degree of consensus.

2 Electronic speed control motor

function, to achieve constant torque, constant current operation, could

be 40 percent energy saving at the same time motor over current

protection.

3Automatically inspect the energy of battery.

When the

voltage of battery is not enough, the crawler will turn back in time .

4It has various real-time function to protect the x-ray generator in

case of meeting water, over-voltage, zero voltage, over-current, zero

current, meeting barrier, antenna falling off, X-ray generator falling

off, over temperature.

5 Instead of γ-source location, it adopts

radio microwave video location, which is safer, more direct-viewing, and

location-accurate.

6 It has a continuous contact with runner in order to

show the inner situation clearly.

e.

g: NDT Equipment fault, battery

State LOW, over tempered inner pipeline, distance to the pipe mouth.

7

It has the automatic stop function, with no need of Real Time

Monitoring.

Main Technical specifications

Model ZY-2 ZY-3 ZY-4 ZY-2C

Limit of applicable pipe-diameter (mm) Φ406-1200 Φ323-529 Φ219-355 Φ508-1400

Outline dimension of creeping instrument (mm) 1410×300×195 1531×210×195 1230×180×195 1150×300×260

Dimension of instruction controller (mm) 420×360×160 420×360×160 420×360×160 420×360×160

Weight (Kg) 80(100) 60 50 100

Creeping Speed (m/min) 12-15 12-15 12-15 13-16

Location error (mm) ±3 ±3 ±3 ±5

Maxima climbing slope 0°-25° 0°-25° 0°-25° 0°-25°

Ray radiation angle 360°×25° 360°×25° 360°×25° 360°×25°

Operate temperature -20℃-60℃ -20℃-60℃ -20℃-60℃ -20℃-60℃

Relative humidity 90% 90% 90% 90%

pipeline crawler configuration

No.

Item Quantity

1 Climb car 1

2 X-ray Generator system 1

3 Command controller 1

4 Battery and cell box 1

5 Changer 1(120V)

6 Supporting plate 2

7 CCD camera 1

8 lifter slide 2

9 connecting cable 2

10 Short sleeves adapting

11 Extension Shaft adapting

Magnetic medium control X-ray pipeline crawler

Features:

1 Ease start, Low-state positioning.

To ensure accurate positioning at the same time, extend equipment life.

2 Features with going through the welding machine, without impacting of the welding machine, good for normal work .

3 X-ray Generator system has a regulatory function of KV, Transillumination to ensure the X-ray film and degree of consensus.

4Electronic speed control motor function, to achieve constant torque, constant current operation, could be 40 percent energy saving at the same time motor overcurrent protection.

5Automatically inspect the energy of battery.

When the voltage of battery is not enough, the crawler will turn back in time .

6It has various real-time function to protect the x-ray generator in case of meeting water, over-voltage, zero voltage, over-current, zero current, meeting barrier, antenna falling off, X-ray generator falling off, over temperature.

℃

Main Technical specifications

Model ZY-2 ZY-3 ZY-4 ZY-2C

Limit of applicable pipe-diameter(mm) Φ406-1200 Φ323-529 Φ219-355 Φ508-1400

Outline dimension of creeping instrument (mm) 1410×300×195 1531×210×195 1230×180×195 1150×300×260

Dimension of instruction controller (mm) 210×87×170 210×87×170 210×87×170 210×87×170

Weight (Kg) 80(100) 60 50 100

Creeping Speed (m/min) 12-15 12-15 12-15 13-16

Location error (mm) ±3 ±3 ±3 ±5

Maxima climbing slope 0°-25° 0°-25° 0°-25° 0°-25°

Ray radiation angle 360°×25° 360°×25° 360°×25° 360°×25°

Operate temperature -20℃-60℃ -20℃-60℃ -20℃-60℃ -20℃-60℃

Relative humidity 90% 90% 90% 90%

Configuration

No.

Item Quantity

1 Climb car 1

2 X-ray Generator system 1

3 Command controller 1

4 Battery and cell box 1

5 Changer 1(120V)

6 Supporting plate 2

7 CCD camera 1

8 lifter slide 2

9 connecting cable 2

10 Short sleeves adapting

11 Extension Shaft

adapting

x Ray Pipeline Crawler

Thank you in advance for your consideration

Company Contact:

• Posted By: Zhong Yi NDT Co.,Ltd

• Phone: 864156133688

• Address: No. 5 Tong Xing Rd. Zhen An District, Dandong , China

• Email:

• Website: http://www.zhongyi-ndt.com

• Business Description: Zhongyi NDT Co., Ltd is manufacturer of NDT x ray equipment in China.
  
  With experience engineer working over 20 years, we design, produce and custom made X ray equipment for oil and gas company, inspection company, wedding testing and other NDT project.
  
  Mainly products: Pipeline crawler, portable x ray generator, Film viewer, x ray tubes, HV coils, ultrasoic flaw detector, Endoscope, Flowmeter and other NDT devices.
  
  Possesses complete production line and testing lab for making x ray tube and HV coils, in order to cotrol the quality of generator.
  
  Combining research, development and business as unity, we continue improve product character by cooperation with science university and NDT society.
  
  All product got CE and ISO 9001: 2008 certification, and won a great reputation with good quality.
  
  Our company always hold idea of "excellent products with faithful service" for supply good quality product and service to all clients all over the world.