Ebs1c Ac Contactor Protection - China

Product Description

ac contactor

Coil Voltage: 24V, 36V, 48V, 110V, 127V, 220V, 230V, 240V,

380V...

Working current: 9A~95A

SEMKO certified

Product Feature

EBS1C AC Contactor is suitable for using in the circuits of

AC 50Hz or 60Hz, rated insulating voltage 660V, rated

operating voltage up to 690V, rated operating voltage

380V/400V in AC-3 type, rated operating current up to 95A,

for making, breaking, frequently starting & controlling the

AC motor. Comibined with the auxiliary contact block, time

relay & mechanical interlocking device etc, it becomes the

delay contactor, mechanical interlocking contactor, star

delta starter, with the thermal relay , it is combinded into

electromagnetic starter. The contactor is produced according

to IEC 60947-4. The product is SEMKO certified.

Other Information

1. Ambient temperature: the upper limit shall not exceed

+40°C; the average value within 24 hours shall not exceed

+30°C; the lower limit shall be not less than -5 °C

2. Altitude: Installation altitude shall not exceed 2000m

3. Atmosphere condition: Relative humidity shall not exceed

50% when the ambient temperature is +40°C. Higher relative

humidity is permissible at lower temperature, for exple, it

can be 90% at 20°C. Special measures should be taken to

address the dew occurred occasionally due to temperature

changes.

4. Anti-polutin degree: Three

5. Installation category: Three

6. Installation conditions: Slant of EBS1C AC contactor

mounting surface shall not exceed ±5°. EBS1C AC contactor

can also be installed with TH type DIN rails of 35mm (32A

and below) and 35mm or 75mm (40A and above) other than by.

7. Shock: EBS1C AC Contactors can be installed and used in

situation with frequency 2~13.2 Hz, amplitude within ±1mm

or places with frequency 13.2~100 Hz and accelerationi with

+ 7/s2

8. Environment protection: environment protection factor has

been taken into consideration in design process by adopting

recyclable and naturally degradable materials into

components. E.g. plastic material adopts Dutch DMC

environmental protection plastics.

9. Duty: EBS1C AC contactor applies to 8 hour working duty,

uninterrupted and intermittent cyclic/periodic duty( load

factor 40% ).

10. Protection level: IP20

Payment

L/C D/A T/T D/P

Delivery

Within 25 days

Minimum Order

200 PCS

Packaging

Standard export carton