200kva Cummins Diesel Generator - China

1. Genset Technical Data:

Gensets model KTC-200GF

Prime power 160KW/200kVA

Standby power 176KW

Rated speed 1500RPM

Output frequency 50Hz

Power Factor 0.8

Phase 3

Rated voltage 400/230V

Dimensions(mm) (L× W× H) 2400*860*1380

Genset Weight(kg) 1440

Prime Power:

This rating is for the supply of continuous electrical power

(at variable load). There is no

limit on the

annual hours of operation and 10% overload power can be

supplied for 1 hour in 12.

Standby power:

(at variable load) in the event

of a utility

power failure. No overload is permitted.

Rated voltage:

Available with customer requirements.

2. Specification of diesel engine:

Engine brand Cummins

Engine model 6CTAA8.3-G2

Number of Cylinders 6

Cylinder arrangement 6 Vertical in-line

Cycle Four stroke

Aspiration Turbo, Water/Air Cooling

Fuel System PB type fuel pump

Bore× Stroke (mm× mm) 114x 135

Displacement (Liter) 8.3

Compression Ratio 17.0: 1

Speed Governor Electrical

Cooling System Forced Water Cooling Cycle

Speed Stability (%) ≤ 1%

Total lubrication system capacity (L)

27.6

Fuel Consumption at 100% Load (g/kwh) 209

Starting Method DC24V Electrical starting

3. Specification of alternator

Alternator brand Stamford

Alternator model UCI274G

Number of Phase 3

Connecting Type 3 Phase and 4 Wires

Number of Bearing 1

Protection Grade IP23

Altitude ≤ 1000m

Exciter Type Brushless, Self-exciting

Insulation Class H

Telephone Influence Factor (TIF)

≤ 50

THF ≤ 2%

Voltage Regulation, Steady State

≤ ± 1%

Transient State Voltage

≤ -15% ~ +20%

4. Specification of control Panel(with KAIXUN LCD

controller)

The control panel is Ordinary integrative type control

panel, with the display of voltage, current, frequency,

water temperature, oil pressure. The genset with low oil

pressure, high water temperature, over speed, over load

protection function.

The features of KAIXUN LCD controller:

KAIXUN LCD controller adopts high performance computer

chip, can modify control procedure and protection parameters

of generator, which incorporating measure, control,

protection and three remote functions and so on, can fully

satisfactory different kinds of Genset auto control

requirements for generator user and or special assembly

factory.

The controller measure and display all output digital

parameters for generator, and rpm, oil pressure, water

temperature, DC voltage and runtime for engine. And the

voltage and current use real virtual value measure to make

sure the data more exacter.

• Chinese/English menu for your choice, large LCD display.

• Can select kinds of preset PT-sensor, and can custom

parameter by corresponding software.

• Keys on control panel are used for selecting control mode,

startup running procedure, data display and modify the

protection parameter. LED indicator is used for indicating

the controller running mode and Genset running status, and

LCD display measuring parameter and status.

• Can select RS485 or RS232 communication port, realizing

long distance monitor, and or fully realizing remote

signaling, telemetering and remote control functions by

communication with PC, can read and setting controller

running parameter.

• The controller is assembled by high strength plasticized

panel and powdered steel shell, all connection are connected

by pin-like and locked up terminal, more easier and

convenient to connect, move, maintain and replace.