Double Stages Vacuum Transformer Oil Purifier Treatment Machine - China

ZYD double stages vacuum transformer oil purifier is mainly used for

removing trace water, gas and impurities from insulating oil, improving

the insulating oil performance index.

It is mainly applied to

purification of 110KV, 220KV, 500KV, 750KV, 1000KV power transmission

equipment insulating oil, also applied to treat low viscosity oils, like

insulating oil, turbine oil, and hydraulic oil in the transmission

equipment which is lower than 110KV.

Meanwhile, Series ZYD oil purifier

can be used as independent vacuum source with functions of vacuum drying

and vacuum oiling.

Insulating oil performance mainly decided by oils

water content, If the water is not saturation in the oil, it appears as

the molecular states; If water is saturation in the oil, it appears as

the liquid states and stay at the bottom of container.

Under the vacuum

states, because the less gas content, the water and gas in the oil will

be escaped from the oil and evacuated by the vacuum pump.

The higher

vacuum value ( Close to 0 Pa) , the higher speed of water molecular

volatilization ( The latest technology, the Vacuum oil purifier can

reach to 1Pa Working vacuum value) .

The gas and water which dissolved

in the oil will become gaseity and exhausted by vacuum pump.

The oil

temperature affect vacuum oil purifier working efficiency, the higher

temperature, the water molecular get more kinetic energy, so it is

higher diffused speed of water molecular.

But, exorbitant temperature

will cause fracture of carbon chain for oil molecular, if that will make

oil bad.

So we don’t suggest the oil temperature excess 80C.

Also the

impurity will affect oil dielectric strength, so the vacuum oil purifier

requires high filtration precision.

Features

1 - Pre- Electromagnetic- valve before vacuum pump to prevent the vacuum oil flow backwards.

2 - Double- stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa

3 - Two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry- level and dielectric strength improving greatly.

4 - Duplex- Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

5 - Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.

If there is any fault, machine will be power off automatically.

6 - Pre- gas- water separator before vacuum pump to prolong the vacuum pump and vacuum pump oil.

7 - Double protecting system, Gas- water separator equips liquid level protector to prevent oil escape from vacuum pump

8 - Optical oil foam detector and high oil level detector to prevent oil escape from vacuum pump

9 - Low oil level sensor to prevent oil pump idle working, so prolong oil pump lifetime

10 - Completely Intelligent pressure protector to protect oil pump and fine filter

11 - Completely Intelligent vacuum controller to protect the booster pump

12 - Fully intelligent temperature controller to prevent the large surge current

13 - Phases protector, voltage overload protector to achieve unattended

Company Contact:

• Posted By: Chongqing NAKIN Electromechinal Co.,Ltd

• Phone: 8602318223358936

• Address: Luohuang , Chongqing , China

• Email:

• Website: http://www.nakinoilpurifier.com/

• Business Description: Nakin Electromechanical Co., Ltd is leading machinery manufacture, our products are mainly transformer oil purifier, turbine oil purifier, lube oil filtration, engine oil regeneration machine in high quality and competitive price.
  
  We has the strong technology and experience in the vacuum oil purifier developing, our machine have been exported to many countries, and service in many industries.