50hz To 60hz Frequency Converter - USA

For small hobby type applications or basic agricultural requirements

where you just want to get a small three phase supply to power a

lathe, drill, drive belt etc there is a basic device called a GoHz

frequency converter 50Hz/ 60Hz.

If you look this up in Google you will

get lots of hits.

Try looking on Google images and you will see what

is going on inside.

You are ready to overheat the network with your question.

It sound more like " How can I pull my track using my bike? ? " You can but the power that you can handle in 50Hz to 60Hz frequency converter is limited.

In case you want to feed a tree phase motor from single phase network, it is possible ( sometimes) using capacitors but the rated power of the motor will be limited to 30% .

Company Contact:

• Posted By: Frequency Converter 60Hz 50Hz

• Phone: 17245883332

• Address: 616 Mercer Rd., Greenville , MS , USA

• Email:

• Website: http://www.frequencyconverter.net

• Business Description: A simple 60Hz to 50Hz frequency converter can be created by connecting
  
  two phases of a 3 phase motor (unloaded) to a single phase source and
  
  connecting the correct amount of capacitance between the two phases of
  
  power supply and the third phase of the three phase motor.
  
  Output is
  
  determined by the 3 phase motor HP.
  
  A single phase to 3 phase frequency
  
  converter can be used with matching capacitor to phase shift your load
  
  is fine for small, lets say less that 2 kW loads.
  
  Plenty of home hobbies
  
  to, do this as they buy a 2nd hand industrial rated drilling machine for
  
  their basement, but 3 phase rated, against a single phase 110V 60Hz to
  
  220V 50Hz frequency converter installation.
  
  Use GoHz single phase to three phase 60Hz to 50Hz converter.
  
  In which you have to give 1 phase 50Hz/60Hz power source to rotor of generator and output will be 3 phase from stator.
  
  Only thing is that this converter generator should be design in winding in such a way so that rotor winding will induce 3 phase 50Hz/60Hz supply from stator.