Single Phase 60hz To 50hz Frequency Converter - USA

The simplest method of creating a good 3 phase AC power source from a

single phase 50Hz/ 60Hz source is to mechanically drive a 3 phase motor

from a single phase 60Hz to 50Hz frequency converter.

Other methods of

accomplishing this electrically are readily available as well.

Please do

some research under the term GoHz frequency converter.

You can get voltages with different phase angle displacements by using different frequency converter connections.

It depends on how you connect your Tee from the primary of the single phase winding.

A simple way is have motor- generator set where motor is single phase & generator is three phase.

Run the motor on single phase & get output in 3 phase power supplies.

Use winding change in single phase 50Hz/ 60Hz frequency converter.

Rotor is of special made.

Stator winding is designed to maintain 3- phase and use a capacitor in between two phase and output will be 3- phase.

We had designed in my previous company such a 1- phase to 3- phase generator.

These converter are used in locomotives.

Company Contact:

• Posted By: Frequency Converter 60Hz 50Hz

• Phone: 17245883332

• Address: 616 Mercer Rd., Greenville , MS , USA

• Email:

• Website: http://www.frequencyconverter.net

• Business Description: A simple 60Hz to 50Hz frequency converter can be created by connecting
  
  two phases of a 3 phase motor (unloaded) to a single phase source and
  
  connecting the correct amount of capacitance between the two phases of
  
  power supply and the third phase of the three phase motor.
  
  Output is
  
  determined by the 3 phase motor HP.
  
  A single phase to 3 phase frequency
  
  converter can be used with matching capacitor to phase shift your load
  
  is fine for small, lets say less that 2 kW loads.
  
  Plenty of home hobbies
  
  to, do this as they buy a 2nd hand industrial rated drilling machine for
  
  their basement, but 3 phase rated, against a single phase 110V 60Hz to
  
  220V 50Hz frequency converter installation.
  
  Use GoHz single phase to three phase 60Hz to 50Hz converter.
  
  In which you have to give 1 phase 50Hz/60Hz power source to rotor of generator and output will be 3 phase from stator.
  
  Only thing is that this converter generator should be design in winding in such a way so that rotor winding will induce 3 phase 50Hz/60Hz supply from stator.