10a Solar Charge Controller 10i Ec 12v 24v - China

Only For off-Grid PV Solar System, Lead-acid Battery, Light and 15hours

Timer Control.

For 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage

For 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage

This solar charge controller is designed for solar DC power supply system.

MCU and professional software are applied as the control center to fulfill intelligent system control.

LED will indicate the working state.

It`s easy to turn on and turn off output through manual operation.

And there are two optional voltage modes, 12V and 24V.

Protection: Package including:

1.1PCS Solar Contorller

2.1PCS User Manual

Overcharging protection

Can be used for all panels

Overdischarging protection

Short and Open Circuit protection

Full specification available if required

Fail Safe and cannot be damaged by accidental wiring mistakes

Advanced design with simple plug and play technology.

No need for complicated adjustments

Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge

Features:

MCU and professional software are used as the control center to fulfill intelligent system control, along with PWM high efficiency charging way.

Boost, recovery and float charging auto work for battery long-life and with temperature compensation.

It has high accuracy over discharging control by the discharging rate, over-discharging control voltage modified by the battery discharging rate curve.

Our controller has the function of self protection from overload, outside and inside short circuit, reverse connection, thunder and lightning, PV panel reverse current, over charging and discharging etc.

During the short circuit and overload protection, no any component will be damaged and need change, including fuse.

The LED will indicate the working state of the system in charging, overcharging power full, power low, over-discharging, over load, out short circuit, load on/off and etc.

Our products meet the industrial production standard with wide temperature running area -35C to +55C.

Rating:

10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)

20I: 12 Volt or 12/24 Volt auto work, 20 Amps (for PV and load)

Equalisation voltage: 14.8Volt

High voltage disconnect(HVD): 14.4Volt

Float voltage: 13.6Volt

Low voltage disconnect(LVD) 11.1Volt

Low voltage reconnect(LVR): 12.6Volt

Self-consumption: 6mA maximum

Temperature compensation: -30mV/C/12V

Terminals: for wire sizes to 6mm2

Temperature: -35C to +55C

LED indicator:

Solar Panel LED:

Green ON when solar is charging Battery.

Green blink when the syetem over voltage

Battery LED:

Green ON when battery level in the right range

Green Slowly flashing when battery level full

Yellow ON when battery level low

RED ON when loads cut off.

LOAD LED:

RED ON when the output is on

RED slowly flashing when it`s over load

(the load amps is 1.24 times of rated current for 60 seconds, or the load amps is 1.5 times of rated current for 5 seconds.

)

RED blink when the load is short -circuit.

This controller has Light and Timer control Function

Light control: When daylight starts to occur then the light source goes off.

Meanwhile the Solar Panels will charge the batteries.

when there is no sunlight the garden light will switch on.

Time control: There is an eight hours time control, that means it will go off when the Lights automatically switch off after 0-15 hours.

Lighting control Option

1 - Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.

The LED is on, which confirmed you have selected the right one.

2 - The controller requires 10 munites of countinuous transiton values before it starts to work.

These constraints avoid false transitions due to lighting or dark storm clouds.

3.10 minutes off before the controller start to work

4 - A brief description follows belows:

Number 0: Dusk-to-Dawn, light is on all night

Number 1: Light is turn on after sundown for 1 hour.

Number 2: Light is turn on after sundown for 2 hour.

Number 3: Light is turn on after sundown for 3 hour.

Number 4: Light is turn on after sundown for 4 hour.

Number 5: Light is turn on after sundown for 5 hour.

Number 6: Light is turn on after sundown for 6 hour.

Number 7: Light is turn on after sundown for 7 hour.

Number 8: Light is turn on after sundown for 8 hour.

Number 9: Light is turn on after sundown for 9 hour.

Number 0: Light is turn on after sundown for 10 hour.

Number 1: Light is turn on after sundown for 11 hour.

Number 2: Light is turn on after sundown for 12 hour.

Number 3: Light is turn on after sundown for 13 hour.

Number 4: Light is turn on after sundown for 14 hour.

Number 5: Light is turn on after sundown for 15 hour.

Number 6: Lights remain turn off , ON/OFF mode

Number 7: Test Mode, lights on after it dects no light, lights off after it defects light.

Company Contact:

• Posted By: YSmart Technology Co.,Ltd

• Phone: 075585232255

• Address: No. 30 XinFeng Road,Potoubei Village,Ailian Town,L, Shenzhen , China

• Email:

• Website: http://www.chinasolarregulator.com

• Business Description: YSmart Technology Co., Ltd is an energetic and technological innovative
  
  company, dedicated in researching, manufacturing and marketing solar
  
  related proudcts, the factory islocated in Shenzhen China.
  
  We provide
  
  products including PWM solar charge controller, Solar Lighting
  
  Controller and MPPT solar controllers.
  
  The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
  
  Since 2009, our service has been expanded to all over world.
  
  Our products are widely used in Spain, United Kingdom, France, India, Italy, Australia and many other countries and regions , and have been extensively applied and highly appraised in a number of major projects.
  
  "Quality first, customer orientation" is our purpose.
  
  YSmart Technology will be committed to provide the best service to you!
  
  Product line:
  
  1A 80A PWM solar charge controllers.
  
  10A 60A MPPT solar charge controllers.
  
  6V, 12V, 24V, 36V, 48V Solar charge controllers.