30a Solar Controllers 12v 24v 30i - China

This items is just for off-grid Solar PV

system.

For 12V PV system: 21V for Max input, 360W

Solar Panel.

For 24V PV system : 42V for Max input, 720W

Brand New PWM 30A Solar Charge Controller

Panel Regulator 12V 24V The Solar lighting

Controller for solar system with automatic

lighting control and time functions.

The

Solar Controller is designed with a

microcontroller for automatic lighting

control functions.

Proven reliability Precise

lighting controller PWM battery charging

Microcontroller digital accuracy Fully

automatic operation 16 field adjustable

lighting control options Manual test

capability Detects day and night using the PV

array Suitable for all 12V /24V lamps

Suitable for Seal lead acid battery

Temperature compensation

Features:

Microcontroller digital accuracy

PWM Charge mode

State of charge (SOC)

Temperature compensation with external

temperature sensor

Detects day and night using the PV array

Big terminals and big distance between

terminals

Functions:

Short circuit protection

Reverse polarity protection

Reverse current protection at night

Over charging or discharging protection

Over load protection

Display:

4 LED indicators

PV: Green ¨Ccharging

Battery: Green-Yellow-Red

Load: Red ¨Coutput on

Red slow flashing& blinking shows mistakes

The fourth double LED shows timers

30I Data Sheet:

30I series: 12 VOLT or 12/24 VOLT auto work,

30 AMPS (for PV and load)

Equalization voltage: 14.8 Volt

Boost voltage: 14.4 Volt

Float voltage: 13.6 Volt

Low voltage disconnect (LVD) 11.10 Volt

Low voltages reconnect (LVR): 12.6 Volt

Temperature compensation: -30mv/¡æ/12V

Self-consumption: 6mA maximum

Terminals: for wire sizes to 2.5mm^2

Temperature: -35¡æ to +55¡æ

LED indicator:

Solar Panel LED:

Green ON when solar is charging Battery.

Green blink when the syetem over voltage

Battery LED:

Green ON when battery level in the right

range

Green Slowly flashing when battery level full

Yellow ON when battery level low

RED ON when loads cut off.

LOAD LED:

RED ON when the output is on

RED slowly flashing when it`s over load

(the load amps is 1.24 times of rated current

for 60 seconds, or the load amps is 1.5 times

of rated current for 5 seconds.

)

RED blink when the load is short -circuit.

This controller has Light and Timer control

Function

Light control: When daylight starts to occur

then the light source goes off.

Meanwhile the

Solar Panels will charge the batteries.

when

there is no sunlight the garden light will

switch on.

Time control: There is an eight hours time

control, that means it will go off when the

Lights automatically switch off after 0-15

hours.

Lighting control Option

1 - Press the power switch for 5 seconds and

select the desired LIGHTING CONTROL

option.

The LED is on, which confirmed you have

selected the right one.

2 - The controller requires 10 munites of

countinuous transiton values before it starts

to work.

These constraints avoid false

transitions due to lighting or dark storm

clouds.

3.10 minutes off before the controller start

to work

4 - A brief description follows belows:

Company Contact:

• Posted By: YSmart Technology Co.,Ltd

• Phone: 8675585232255

• Address: No. 30 XinFeng Road,Potoubei Village,Ailian Town,L, shenzhen , China

• Email:

• Business Description: YSmart Technology Co., Ltd is an energetic and technological innovative
  
  company, dedicated in researching, manufacturing and marketing solar
  
  related products, the factory is located in Shenzhen China.
  
  We provide
  
  products including PWM solar charge controller, MPPT solar controllers
  
  and Grid Tie inverters.
  
  The company presses the ISO 9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.