Rubbing Color Fastness Tester Qinsun - China

Standards

BS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8A Application

This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing.

Technical Parameter

Max head travel: 104mm

Head pressure 9N

Head dimension round 16mm

Counter range 1~99999 times

Instrument size 700*240*340mm

Weight 15Kg

Test Procedure

1 - Sample preparation:

1 - 1 The sample and standard small white friction cloth need to be moisturized in a constant temperature and humidity environment.

1 - 2 When the sample has many colors, all colors should be rubbed.

1 - 3 if the area of various colors is large enough, take different colored smaple separately.

1 - 4 To make dry friction and wet friction, ensure that all colors are rubbed.

1 - 5 If the two sides of the sample are made of different materials and colors, the test will be done on both the two sides.

1 - 6 Dry and wet rubbing fastness test should not be repeatedly done in the same part of the sample.

2 - Dry friction:

2 - 1 Place the sample flat on the tester with sandpaper laid on.

Make the lengitudinal direction of the specimen consistent with the moving direction of the instrument and fix the sample on the pressing plate, and the sample should be flat.

2 - 2 Apply the standard friction cloth to the friction head, tighten with the spring clamp, and place the friction head on the sample.

2 - 3 Ensure that the sample has no slip or wrinkle when the friction starts; 2 - 4 Put the friction head on the sample.

Connect the POWER and press the POWER button.

Set test times.

2 - 5 Start the test by pressing the START button.

When the test number reaches the set value, the instrument automatically stops.

2 - 6 Remove the standard white friction cotton cloth and compare for rating with the gray card.

3 - Wet friction:

3 - 1 Completely wet the standard friction cloth in distilled water; 3 - 2 Squeeze the friction cotton in the filter paper after taking out, but contain certain water content; 3 - 3 The remaining steps are the same as the above dry friction test; 4 - Result processing:

4 - 1 Before rating, use scotch tape to gently stick the loose fluff off the white cloth.

4 - 2 Place three layers of unused friction white cloth under the white cloth to be assessed, and the color rating of the small white cloth should be evaluated by reference to the standard stained grey scale.

5 - Test report:

5 - 1 Report standard method 5 - 2 Report dry friction and wet friction results respectively.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: 18326093791

• Address: 280 Jiugan Road, Songjiang district, Shanghai , Shanghai , China

• Email:

• Website: https://standards-groups.com/

• Business Description: Standard Groups is an integrated supplier specialized in providing material test instruments and “The Whole Laboratory Program” solutions.
  
  The main products cover many areas: Textile and Apparel, Leather and Footwear, Flammability Testing, Filter Material Testing, Automotive Interior, Toy Testing, Non-woven and Geo-membrane, Carpet Testing, Luggage/Furniture/Office Furniture Testing, Material and Parts of Automotive, Weathering and Light Stability Testing, Ovens and Environmental Testing Chambers, Salt Fog Chambers, Materials Testing Machines, 3D Body Scanning and Manikin, Air Quality Monitoring and Measurement, Package Material Testing, Electrical Safety Testing, Optical and Spectroscopy Instruments, Lighting and Color Assessment, Microscopy and Legal Inspection, and relative testing services.