Sand And Dust Test Chamber For Automotive Connectors - China

Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hours ≤28°C); Ambient humidity: ≤85% Technical Parameters: 1 - Nominal spacing of the metal mesh is 50μm, and the nominal spacing between wires is 70μm 2 - Airflow velocity: ≤2m/s (standard type) or ≥2m/s (specify when placing an order) 3 - Continuous or periodic dust - blowing can be freely selected, or time can be set 4 - Talcum powder dosage: 2kg - 4kg/㎡ 5 - Dust for testing: Dry talcum powder, portland cement, soot, etc.

6 - Vibration time: adjustable from 0 to 9999 minutes (M represents minutes) 7 - Fan cycle time: 0 to 9999 minutes (M represents minutes) 8 - Standard configuration: The sand and dust testing equipment is equipped with 2 specimen racks and 2kg of talcum powder 9 - Power requirements: AC380(±10%)V/50HZ, three - phase five - wire Product Applications: This equipment is suitable for dust - proof and dust - resistance tests of various automotive components, including vehicle lamps, instruments, electrical dust - proof sleeves, steering systems, door locks, etc., to verify the sealing quality of products.

Structural Features: 1 - Material of the chamber outer shell: High - quality carbon steel plate, with phosphating and electrostatic powder spraying on the surface, and hairline treatment for SUS304 stainless - steel strips; 2 - Inner liner material: Imported SUS stainless - steel polished plate; 3 - Chamber door: Tempered glass door, facilitating the observation of the tested samples inside the test chamber; 4 - High - quality fixed PU casters are used at the bottom; 5 - There is a dust - replacement device at the bottom of the test chamber; System Structure: 1 - Control system: The sand and dust testing equipment is controlled by a programmable logic PLC controller to manage the time and sequence of the dust - blowing, vibration and vacuum systems 2 - Actuating components: "Schneider" AC contactors, switches, buttons; "Fuji" intermediate relays; "Panasonic" dust - proof sockets 3 - Dust pre - heating system: Stainless - steel mica heating jacket, with stable and safe heat; it has timer - controlled heating; Vacuum system: Equipped with a pressure gauge, air filter, pressure - regulating triple unit and connecting pipes (the vacuum pump is provided separately, please specify when placing an order) 4 - Power socket for test specimens: Dust - proof socket, AC220V 16A 5 - Circulating fan: Low - noise motor with a multi - blade centrifugal impeller 6 - Protection system: With protection functions against electric leakage, short - circuit, over - temperature, motor overheating, over - current / power - off memory protection for the controller

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: 18326093791

• Address: 280 Jiugan Road, Songjiang district, Shanghai , Shanghai , China

• Email:

• Website: https://standards-groups.com/

• Business Description: Standard Groups is an integrated supplier specialized in providing material test instruments and “The Whole Laboratory Program” solutions.
  
  The main products cover many areas: Textile and Apparel, Leather and Footwear, Flammability Testing, Filter Material Testing, Automotive Interior, Toy Testing, Non-woven and Geo-membrane, Carpet Testing, Luggage/Furniture/Office Furniture Testing, Material and Parts of Automotive, Weathering and Light Stability Testing, Ovens and Environmental Testing Chambers, Salt Fog Chambers, Materials Testing Machines, 3D Body Scanning and Manikin, Air Quality Monitoring and Measurement, Package Material Testing, Electrical Safety Testing, Optical and Spectroscopy Instruments, Lighting and Color Assessment, Microscopy and Legal Inspection, and relative testing services.