Wt2080 Led Power Driver Tester - China

WT2080 LED Power Driver Test Instrument is the comprehensive test

instrument for LED drive power which is according to GB/T 24825-2009 and

IEC 62384: 2006 - It can measure the following parameters: Input

Characteristics Test (AC&DC), Output Characteristics Test (AC&DC), Input

Start Characteristics Test (DC)

Specification:

1 - Input Characteristics Test (AC)

•To measure the input voltage, current, power, power factor, power grid frequency, total harmonic and the harmonic component of 0 ~ 50 times, wave ratio, initial phase angle, peak phase angle, the phase Angle.

• The fundamental frequency scope of the current and voltage : 45Hz～65Hz; Narrowband range: 45 Hz ~ 5 kHz; Broadband range: 45 Hz ~ 1 MHz.

• Voltage range: 3 ~ 300 V (CF = 1.67); Current range: 5mA ~ 2.7A (CF = 3); Power range: 0.015 ~ 800 W; Power factor range: 0.000 ~ + 1.000.

2 - Input Characteristics Test (DC)

• Measuring voltage, current, power.

• Voltage range: 3～500V; Current range: 5mA～8A; Power range: 0.015～4000W

3 - Output Characteristics Test (AC)

• Measuring lamp voltage, lamp current, and lamp power.

• Lamp voltage range: 3～300V(CF=3); Lamp current range: 5mA～2.7A(CF=3); Lamp power range: 0.015～800W

4 - Output Characteristics Test (DC)

• Measuring output lamp voltage, lamp current, lamp power, ripple wave current.

• Voltage range: 3～500V; Current range: 5mA～8A; Power range: 0.015～4KW; Ripple wave current range: 5mA～2.5A.

5 - Output Start Characteristics Test (DC)

• Change curve and data of the measuring lamp voltage and lamp current within 0～2 seconds.

• Lamp voltage range: 3～500V;

• Lamp current range: 5mA～8A

Company Contact:

• Posted By: Lisun Electronics Inc.

• Phone: +862151083341

• Address: Room 1210, No. 9 Building, Jiangqiao Wanda Plaza, , Shanghai , China

• Email:

• Website: https://www.lisungroup.com

• Business Description: Lisun Electronics Inc was found by Lisun Group in 2003 - We have sales &
  
  service offices in Hong Kong and Shanghai.
  
  In 2012, we built a high
  
  level products show room & lab center in Shanghai.
  
  Lisun Group has set
  
  up a new manufactory in China to research and develop the world high
  
  technology CFL & LED Test Instrument.
  
  Its quality system has been
  
  strictly certified by ISO9001: 2008 - The Lisun Group products have been
  
  authenticated by the third party lab and were award CE certificate.
  
  As a
  
  CIE Supportive Member, all of the test instruments of Lisun Group are
  
  designed according to CIE Standards.