Computer Controlled Electronic Universal Testing Machine - China

Product Introduction

1 - Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 foam polymer material compression permanent deformation determination, GB/T10807 soft foam polymer material compression hardness test method, GB/T10808 Soft foam tear performance test method ".

2 - Application: Determination of stretch, tear, elongation at break, collapsibility hardness and compression permanent deformation of polyurethane foam.

3 - Supply model: Imported servo motor with double precision ball screw.

4 - Test results: It can measure the tensile strength, compressive strength, elongation at break, elastic modulus, stress, strain and other parameters of the material.

5 - Force value measurement: equipped with high-precision domestic sensor, full range linear, wider test range.

6 - Curve mode: Tensile: force-elongation, stress-strain, strength-time; Force-time, extension-time, strain-time.

Compression: force-deformation, stress-strain, strength-time, force-time, deformation-time, strain-time.

7 - Local amplification test: Any section on the curve can be used for regional amplification analysis and reduction.

8 - Data analysis: The test data on the curve can be selected and analyzed at will.

9 - Automatic storage: test conditions, test results, test curves, data and a group of sample results are selected to be valid, and can be continuously tested and stored, called at any time; 10 - Report selection print: you can select different report formats according to user needs, you can use EXCEL or Word or PDF to directly view the report or select different curve data comparison forms.

11 - Breaking stop function: the sample can automatically stop at the moment of breaking.

12 - Automatic protection: automatic overload, over-current, over-voltage, under-voltage, over-temperature, upper and lower limit protection.

13 - Control function: constant test force, constant deformation control mode, automatic return function.

14 - Manual control: In addition to automatic control, there is a Chinese liquid crystal display manual control box, which can manually operate the beam up and down, making it more convenient to move the beam position control.

15 - Zero clearing: load, deformation, displacement measurement can be manually or automatically zero.

Standards

GB/T 16491 CN2674430Y Performance parameters

- Testing machine grade: 0.5 - Displacement measurement range: 0——999mm - Maximum test force: 1kN——20kN - Resolution: 0.001mm - Effective force measurement range: 0.4%——100%FS(internal and external ungraded) - Displacement accuracy: ±0.5% - Resolution: 1/300000 - Beam deformation measurement accuracy: ±0.5% - High precision sensor accuracy: ±0.5% - Beam deformation measurement range: 600mm - Load measurement accuracy: ±0.5% - Effective test width: 900mm - Test speed adjustment range: 0.05——500mm/min(stepl ess speed regulation) - Speed accuracy: ±0.5% - Beam maximum effective travel: 1200mm - Control range of uniform test force rate and uniform deformation rate: 0.01%——10%FS/S - Control error of uniform test force rate and uniform deformation rate: 0.5% - Constant test force, constant deformation control range: 0.5%——100%FS - Constant test force, constant deformation control error: less than 10%FS is ±1% of the set value; Greater than 10%FS is ±0.1% of the set value - Power supply: AC220V 0.5KW

Company Contact:

• Posted By: Standard Group (Hong Kong) Co., Ltd.

• Phone: 15715691047

• Address: Jindu Road, Minhang District, Shanghai , China

• Email:

• Website: https://www.standard-groups.com/en/

• Business Description: standard international group (hk) limited was established in 2003 and headquartered in hong kong.
  
  the branch company in mainland is shanghai general standard textile testing technical company.
  
  in changsha, wuhan, jinan, shenyang, chengdu, hangzhou and other places, standard groups has set up offices and after-sales service centers.
  
  standard groups is an integrated supplier specialized in providing material test instruments and “the whole laboratory program” solutions.
  
  the main products cover many areas: textile and apparel, leather and footwear, flammability testing, filter material testing, automotive interior, toy testing, non-woven and geo-membrane, carpet testing, luggage/furniture/office furniture testing, material and parts of automotive, weathering and light stability testing, ovens and environmental testing chambers, salt fog chambers, materials testing machines, 3d body scanning and manikin, air quality monitoring and measurement, package material testing, electrical safety testing, optical and spectroscopy instruments, lighting and color assessment, microscopy and legal inspection, and relative testing services.