Iso 12103 2 M2 Test Dust - China

Product Introduction:

Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the reliability of components of fuel and hydraulic oil systems in the aerospace and automotive industries.

Typical mixtures of contaminants tested within the fuel system range from iron oxidation (rusting) to carbon fiber rods, graphite epoxy composites and fire extinguishing foams.

Standards:

ASTM E1226-22 - IEC 60079-20-2: 2022 - ISO 6184-1: 2023 - EN 14034-4: 2021 - NFPA 68: 2023 - ISO 12103-2 Advantages:

Particle Technology UK has considerable experience in testing dust for fuel pollution to meet UK, EU, US, Japanese and international standards.

The test dust can also meet Arizona dust, regardless of particle distribution and composition, to meet the specific requirements of the customer.

Standard tests simulate dust from deserts to cities, from natural gas pipelines to jet fuel, and from railroads to airplanes.

This allows you, as a customer, to test your product in real-life situations to highlight its advantages.

Parameters:

Maximum Explosion Pressure (Pmax): Pressure value (0-20 bar, refer to ASTM E1226) Maximum Explosion Pressure Rise Rate (dP/dt)max): Rate value (0-1000 bar/s) Explosion Index (Kst): Classification value (St0-St3) ) Concentration Limits: Minimum Explosive Concentration (MEC): Concentration values (10-500 g/m³, refer to GB/T 16425) Maximum Explosive Concentration (MOC): Concentration values (500-5000 g/m³) Critical Dilution Concentration: Inert Addition Amount (≥ 50 vol%) Particle Size Distribution: Mean Particle Size (D50): Size Range (1-500 μm) Distribution Width (Span): Value (≤ 2.0) Fine Powder Content: Percentage (<75 μm, ≥ 20%) Humidity Effect: Critical Humidity Point: Relative Humidity (≥60%) Moisture Content Impact: Moisture Content (≤5wt%) Dry Dust Ignition Delay: Time Value (<10ms) Oxygen Content Correlation: Minimum Oxygen Concentration (MOC): Oxygen Content (≤12vol%) Oxygen Limiting Index: Value (≥0.21) Inerting Concentration: Inert Gas Proportion (≥30vol%) Dust Layer Characteristics: Layer Thickness Ignition Temperature: Temperature Threshold (≥300°C) Bulk Density: Value (0.2-1.5g/cm³) Autoignition Propensity: Time Delay (≤60min) Dispersion Performance: Dust Cloud Formation Efficiency: Dispersion Factor (≥0.8) Suspension Time: Duration (≥5s) Settling Rate: Velocity (0.1-10cm/s) Electrostatic Parameters: Dust Resistivity: Value (10^6-10^12Ω·cm) Charge Decay Time: Time (≤10s) Electrostatic Spark Energy: Energy Threshold (≤30mJ) Chemical Composition: Volatile Matter: Percentage (≥10wt%) Ash Impact: Ash Content (≤20wt%) Combustible Material Ratio: Value (≥70%)

Company Contact:

• Posted By: Standard Group (Hong Kong) Co., Ltd.

• Phone: 15715691047

• Address: Jindu Road, Minhang District, Shanghai , China

• Email:

• Website: https://www.standard-groups.com/en/

• Business Description: standard international group (hk) limited was established in 2003 and headquartered in hong kong.
  
  the branch company in mainland is shanghai general standard textile testing technical company.
  
  in changsha, wuhan, jinan, shenyang, chengdu, hangzhou and other places, standard groups has set up offices and after-sales service centers.
  
  standard groups is an integrated supplier specialized in providing material test instruments and “the whole laboratory program” solutions.
  
  the main products cover many areas: textile and apparel, leather and footwear, flammability testing, filter material testing, automotive interior, toy testing, non-woven and geo-membrane, carpet testing, luggage/furniture/office furniture testing, material and parts of automotive, weathering and light stability testing, ovens and environmental testing chambers, salt fog chambers, materials testing machines, 3d body scanning and manikin, air quality monitoring and measurement, package material testing, electrical safety testing, optical and spectroscopy instruments, lighting and color assessment, microscopy and legal inspection, and relative testing services.