Plc Liquid Crystal Touch Impact Testing Machine Simple Suspension - China

Product Introduction:

Liquid crystal touch impact testing machine is mainly used for hard plastics (including sheet, pipe, plastic profile), reinforced nylon, glass fiber reinforced plastic, ceramic, cast stone, electrical insulation materials and other non-metallic materials impact toughness measurement, widely used in the chemical industry, scientific research units, universities and other quality testing departments.

Standards:

GB/T 11022-2020 - GB/T 3906-2020 - JB/T 10840-2008 - GB/T 7251.1-2013, GB/T 7251.4-2017 - GB/T 7251.5-2017, GB/T 20641-2014 GB/T 20138-2006, GB/T2423.55-2006, Q/GDW11008-2013 Main features:

Not poor quality: the use of high hardness and high-precision bearings, and the use of shaftless photoelectric sensors, fundamentally eliminate the loss caused by friction, to ensure that the friction energy loss is far less than the standard requirements.

Intelligent prompt: According to the impact of the situation, intelligent prompt working status, always interact with the experimenter, to ensure the success rate of the test.

Friendly interface: there are parameter setting interface - result query interface - measurement interface - system setting interface, each operation has a clear user prompt, you can record 10 test records, you can choose domestic and international standards, you can choose Chinese and English.

Accurate measurement: In full accordance with the provisions of the new standard, after 10 swing cycles for a calculation of energy loss, each measurement to go through 3 times to average, to ensure the accuracy of energy loss.

Performance parameters:

1 - Simple beam impact testing machine - Impact speed: 2.9m/s - Impact energy: 1/2/4/5J - Maximum friction loss energy: <0.5% - Pendulum prelift Angle: 150±1° - Strike center distance: 230mm - Power supply: 220VAC-15% —— 220VAC+10%, 50Hz(single-phase three-wire system) 2 - Cantilever beam impact testing machine - Impact speed: 3.5m/s - Impact energy: 1J; 2.75 J; 5.5 J; 11J; 22J(3 hammers, customer's choice) - Maximum friction loss energy: <0.5% - Pendulum prelift Angle: 150±1° - Strike center distance: 335mm - Power supply: 220VAC-15% —— 220VAC+10%, 50Hz(single-phase three-wire system)

Company Contact:

• Posted By: Standard Group (Hong Kong) Co., Ltd.

• Phone: 15715691047

• Address: Jindu Road, Minhang District, Shanghai , China

• Email:

• Website: https://www.standard-groups.com/en/

• Business Description: standard international group (hk) limited was established in 2003 and headquartered in hong kong.
  
  the branch company in mainland is shanghai general standard textile testing technical company.
  
  in changsha, wuhan, jinan, shenyang, chengdu, hangzhou and other places, standard groups has set up offices and after-sales service centers.
  
  standard groups is an integrated supplier specialized in providing material test instruments and “the whole laboratory program” solutions.
  
  the main products cover many areas: textile and apparel, leather and footwear, flammability testing, filter material testing, automotive interior, toy testing, non-woven and geo-membrane, carpet testing, luggage/furniture/office furniture testing, material and parts of automotive, weathering and light stability testing, ovens and environmental testing chambers, salt fog chambers, materials testing machines, 3d body scanning and manikin, air quality monitoring and measurement, package material testing, electrical safety testing, optical and spectroscopy instruments, lighting and color assessment, microscopy and legal inspection, and relative testing services.