Vertical Preheater Zhengzhou Mining Machinery - China

Vertical preheater is one of the main equipment in active lime

production.

And its main function is to sent limestone from the upper

part to the body of preheater.

Making use of high- temperature exhaust

gas ( 950℃ - - 1100℃ ) discharged from the calcinations

kiln to make heat exchange and the preheat the materials evenly into

900℃ in the preheater.

After preheating , there is 30% CaCO3

will decompose and then pushed into rotary kiln for burning by the

hydraulic push rod .

So such a calcinations process not only shorten

the time of limestone burning in the kiln, but also get a high degree

of the active lime.

Our company adopts LDO preheater.

Compared with ordinary perheater, it reduces the loss of line gas resistance and the power of smoke ventilator greatly.

It saves the energy consumption.

Besides, it has the advantage of easy operation and maintenance, simple masonry and reliable performance.

The Features of Vertical Preheater：

1 - The upper feeding system: includes the upper hopper, the next material possession, the next feeding method and structure can guarantee to the pre- heater of the body feeding to achieve security when closed.

So that the cold air from outside can not enter into the preheater and feeding can make use of valve rod to achieve continuous or intermittent feeding.

2 - Preheater body: it is to ensure that material preheated to 900 degrees celsius of the most important part.

It is by the warm room, hanging devices and brick lining ( which does not belong to the scope of design and manufacturing equipment) and other parts.

That part of the structure of most of metal structures, part of the material according to the need to use a heat- resistant steel, heat- resistant steel to 1100 degrees celsius in 1000 to work under high temperatures.

In addition, the refractory bricks lining structure, novel design, sealing is good, can guarantee the material in pre- heater evenly and achieve pre- heating temperature preheating.

3, Pusher devices: mainly rod, framework, and connecting rods and other parts of rod using heat- resistant steel casting or welded together, can withstand high temperatures, using electronic control and hydraulic systems can be by putting the various hydraulic automatic control program to achieve sequential pusher.

4, The hydraulic system: includes tanks, pumps, motors, solenoid valves, hydraulic tubing, etc.

, his main role is to control the pusher device to push the completion of material movement.

5, Bottom feeding room: The main include slide tube, feeding the main room, feeding slip mouth and so on, its main role is to import the materials after preheating rotary kiln calcination.

6, Framework: It includes columns and ring beam and so on, the main role is to carry The upper part of the structure.

Working Principle of Vertical Preheater:

The working principle of preheater： According to the place of preheater in rotary kiln system, and negative pressure working principle of preheater.

Heat emission is heat convective, the material and air is convection movement.

When the raw materials fed into the preheater, under the negative pressure condition, to prevent cold air into the preheater, the inlet of raw materials must take effective seal.

This is to ensure the effective use of heat and material preheating effect.

The standard of preheating quality in the preheater, is the feeding room’s temperature which is in the bottom of preheater.

Kiln temperature is: detected by thermocouple in the side wall of feeding room, including the flame radiation and air temperature.

It reflects the firing temperature when feed into kiln, but also the degree of feedback the final warm- up temperature of the material.

To Preheater, Truly reflects the effective temperature of the material is outlet temperature of the Preheater top.

Temperature control on this point is more important than the end of the rotary kiln temperature control.

Within preheater, materials after preheating and pre- decomposition, pushing out from Preheater to rotary kiln by hydraulic plunger device.

Company Contact:

• Posted By: Henan zkcorp

• Phone: 8637155902866

• Address: Qiaoloucaizhai industrial park,XingYang,ZhengZhou,, zhengzhou , China

• Email:

• Business Description: Henan Zhengzhou Mining Machinery Co., Ltd. is a global leading manufacturer of ball mill.
  
  Ball mill and other products produced by our company take a long term leading market share.
  
  Our products have been exported to more than 50 countries and regions in the world, highly valued and acclaimed by our customers over the years!