Static Mixer Strengthening Heat Transfer - China

The mixing process of a static mixer is carried out by a

series of mixing units with different specifications

installed in a hollow pipe.

The mixing units function to

rotate the fluid towed the left sometimes and to the right

sometimes, changing the flow direction, so that, the center

fluid is not only pushed to the surrounding, but the

surrounding fluid is pushed to the center, resulting in a

good radial mixing effect.

At the same time, the fluid

relying on its own rotating effect will also rotate on the

interface of the connected part of adjacent components; this

perfect radial circular flow mixing effect makes materials

uniformly mixed.

The static mixer is designed, manufactured and accepted

completely according to the industry standard JB/T7660-95

static mixer.

The static mixer can be used for mixing, emulsification,

neutralization, absorption, extraction, reaction, and

strengthening heat transfer and other processes of liquid -

liquid, liquid - gas, liquid - solid, gas - gas, and can

also be used for intermittent operation and continuous

operation within a range of very high viscosity in the state

of different flow types (laminar flow, transition flow, and

turbulent flow).

A brief introduction to the scope of

different applications is made at first in the following.

(1) Liquid - liquid mixing

The fluids with a viscosity in the range of 10 Mpa•s from

the flow layer to turbulent flow can be mixed well.

The

smallest diameter of dispersed droplets can reach 1 ~ 2μm,

and they distribute uniformly in size.

(2) Liquid - gas mixing

The static mixer can make the phase interface between liquid

- gas two-phase components keep continuously updated and

full contact, and the bubbling tower and sieve-plate column

can be replaced under certain conditions.

(3) Liquid - solid mixing

When a small quantity of solid particles or powder mixes

with a liquid (the area of the solids accounts for about 5%

of the area of liquid) in the turbulence condition, and

using the static mixer can force the solid particles or

powder to be fully dispersed, so as to extract or bleach the

liquid.

(4) Gas - gas mixing

It can be used to mix cool and hot gases and to mix

different gas components.

(5) Strengthening heat transfer

As the static mixer increases the contact area of the

fluid, which improves the heat transfer coefficient.

In

general, the cooling or heating of gases is completed by use

of the static mixer, the heat transfer coefficient of gases

can be increased by 8 times; the heat transfer coefficient

of gases for heating viscous liquids can be increased by 5

times; the heat transfer coefficient can be increased by 8.5

times when condensing the gas in which a large quantity of

non-condensable gases exist; the heat transfer of polymer

melt can reduce the temperature and viscosity gradient on

the pipe cross-section.

Company Contact:

• Posted By: Hichine Industrial (Beijing) Co. Ltd

• Phone: 861083265380

• Address: No. 19, South Road of West 4th Ring, Fengtai Distr, Beijing , China

• Email:

• Website: http://www.hichine.com

• Business Description: Hichine is a joint stock enterprise which combines R&D, design,
  
  production, import & export as a whole, Hichine specializes in
  
  manufacturing fluid devices such as pumps&valves and providing related
  
  technologies, products and solutions.
  
  Hichine provides equipment,
  
  systems and services in order to help customers improve equipment
  
  performance and optimize their process.
  
  Hichine wins respect by quality
  
  and technology and service the customers all over the world through the
  
  business philosophy of "Endless pursuit of all users" .