Voc Tail Gas Treatment Equipment For Lost Foam Casting - China

Voc tail gas treatment equipment For Lost Foam Casting

The VOC Exhaust Gas Treatment System for Lost Foam Casting is a high-efficiency solution designed to manage volatile organic compounds generated during lost foam casting processes.

Engineered for industrial foundries, this system effectively reduces VOC emissions, ensuring compliance with environmental regulations while maintaining a safe and clean working environment.

Processing air volume: 10000/20000/30000m ³/ h;

Combined system of adsorption concentration desorption and catalytic combustion equipment: 1 adsorption bed; Carbon consumption: 1.5 cubic meters;

Activated carbon adsorption bed: The main material is Q235, made of 1.5 thick steel plate, and the inner plate is 1.2 galvanized plate, containing 5cm silicate rock insulation;

CO catalytic combustion furnace: The main material of the shell is Q235, with a thickness of 2.0 and 8 inner plates.

It is filled with 10CM silicate rock for insulation treatment.

The heating tube fins are made of 304 stainless steel, with 30 heating tubes and a total power of 60KW.

Plate heat exchanger;

Main air centrifugal fan with frequency conversion: 4-72-6C-15KW, including 15KW frequency converter;

Desorption centrifugal fan: 9-19-4C 2.2KW;

Electric control system: intelligent touch screen PLC automatic control.

Main functions and advantages

Activated carbon adsorption system: The exhaust gas enters the activated carbon adsorber for adsorption, and after passing through the adsorber, it is discharged into clean air that meets the emission standards.

Desorption system: When the adsorber is saturated, it will enter a desorption state and use hot air to desorb the organic solvents in the adsorber, discharging high concentration waste gas into the CO device.

Catalytic combustion system: High concentration organic waste gas is first heated up to the CO starting temperature through a heat exchanger.

If the temperature cannot be reached, the electric heating method is turned on to raise the temperature to the starting temperature.

After the waste gas enters the catalytic combustion chamber, it starts combustion and purification on the catalyst.

The temperature of the emitted flue gas can reach 400-500 ℃.

When the concentration of organic waste gas reaches a certain level, it can maintain spontaneous combustion in the catalytic bed without external heating, At this point, the electric heating can be stopped.

The flue gas after combustion is preheated by a heat exchanger and enters the catalytic bed for combustion.

The cooled flue gas is then exchanged with fresh air to control the temperature of the desorbed gas at around 120 ℃, and then discharged into the chimney through the exhaust valve.

After desorption, proceed to the next cycle.

Company Contact:

• Posted By: Hebei Guoning Heavy Industry Manufacturing Co., Ltd

• Phone: 18631132318

• Address: 1101, Block C, Tianshan Galaxy Plaza, No. 358 Yuhu, shijiazhuang , hebei , China

• Email:

• Website: https://www.gnepc.com/

• Business Description: Explore our Turnkey Lost Foam Casting Production Line, designed for seamless, cost-effective casting solutions with high precision and reliability.