Water Pump Antifreeze Protection In Cold Winter - China

sewage self-priming close coupling pump

centrifugal water pump with self-priming height up 4.5meters

drainage for clean water or wastewater or sewage

Antifreeze protection measures for water pump in cold winter

In order to ensure the safety and normal operation of the equipment, anti-freezing measures are formulated as follows:

1 - Add heat preservation material to the water pump to prevent the water pump from freezing.

2 - Empty the temporarily unused pump body.

Add water when use pump in order to prevent the water pump from freezing and cracking.

3 - In the basement pump room with HVAC and no HVAC, the door and window must be closed.

In the unfinished basement pump room, the wind tunnel must be blocked.

4 - Since all the equipment of our company leaves factory with hydraulic test, there is water in the pump body and pipeline valve.

If the equipment is not installed, please be sure to take drainage measures to prevent pump freezing and cracking.

5 - If the water pump is frozen, do not start the water pump.

Use hot water or pour it into the water pump to dissolve ice or heat the outer shell of the water pump.

6 - Place the pump in a normal temperature environment to dissolve ice naturally.

Water pump freezing and cracking is caused by natural factors.

It does not belong to maintenance scope of free charge.

Please take the corresponding measures mentioned above to protect water pump and further avoid damage.

Thank you for your cooperation!

Company Contact:

• Posted By: Kenshine Pump And Valve MFG Co.,LTD

• Phone: 862133592713

• Address: Yindu Road 1535,Minhang District, Shanghai, Shanghai , China

• Email:

• Website: http://www.kenshine-pump.com

• Business Description: Manufacturer and sales for various pumps such as centrifugal
  
  pump, industrial pump, chemical pump, submersible pump, self priming
  
  pump, diaphragm pump, electromagnetic pump, gear pump, multistage pump etc
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD is the integrated enterprise specializing in research and development and design and produce and sales of pump and valves.
  
  KENSHINE PUMP&VALVE MANUFACTURING CO., LTD locates in MINHANG industrial zone, SHANGHAI which is the economic trade center in China and established in 1985 - KENSHINE PUMP&VALVE MANUFACTURING CO., LTD have developed and enlarged many years, supported by scientific management, sophisticated technology, advanced equipment and strict quality system.
  
  Company is continuously going up as the 40% rising speed every year and is as the one of industrial manufacturer in China.
  
  Company had ISO certificate in 1998 and the products are according to JB/JQ20103 1998 and JB/JQ20104 1998 standard.
  
  The quality of products is insured by PICC.
  
  Company has several sales and service networks in many middle and big cities of China.
  
  The products are sold to domestic cities and exported oversea about 40% products.