Pci Laser Control Card 502d Engraving Main Marking Board Equipment - China

502D board is specifically used for laser marking.

Using PCI bus, the

marking is fast and stable.

With MarkingMate software, it can achieve a

variety of combinations.

Support the control of lamp pumped ,

semiconductor ( end-pumped and side-pumped ) , and CO2 laser marking

system.

It supports Digital galvanometer and supports most of engraving

applications as well, like static marking on flat, small spherical

surface or small camber surface with complex graph.

Some reserved I/O

pins could connect with rotary axis device to perform rotary axis

marking.

502D is a truly good C/P value card for general laser marking

application.

502D main board

Dimension: 119.9mm x 91.0mm;

Support Windows 98/2000/XP/Vista/Windows 7;

Default possesses one set of XY2-100 digital galvanometer signal;

Optional16 switching outputs (TTL level, DO8 to DO23 with photo coupling isolation) , they can connect with input signals of pedal switch and other auxiliary equipments(Only 502D + board has this function);

Default has 24 switching outputs, can control auxiliary equipments of laser marking control system, like laser power, acousto-optic power, rotary axis, XY table, solenoid valve etc;

OptionalThere are another optional 8 switching outputs (TTL level, DO16 to DO23 have photo coupling isolation) , they can connect with input signals of pedal switch and other auxiliary equipments(Only 502P + board has this function)

Default has 8 channels switching inputs (TTL level, DI0 to DI7 with photo coupling isolation), they can connect with input signals of pedal switch and other auxiliary equipments;

Default has 1 PWM signal, the frequency and duty ratio can be set by software, used for acousto-optic modulation and CO2 laser control;

Default has 1 32-bit hardware timer, can be worked with software to perform mark on the fly;

Default possesses one IPG dedicated port;

Note：This card with MarkingMate software can achieve variety of combinations, like lamp-pumped, DPSS side-pumped, end-pumped and CO2 laser marking system etc

Warning：502D doesn’t support hot-plug, or the board will be burnt out

Company Contact:

• Posted By: Kingyu Software

• Phone: 8613616215571

• Address: NO.601 LiSheng Building, NO.60 Suli Road, Wuzhong , Suzhou , China

• Email:

• Website: http://www.kingyukg.com

• Business Description: involved in international trade import export of goods, products, and services