Hot Dipped Iron Wire - China

Hot dipped galvanized wire is a kind of wire going through hot dipped galvanizing treatment.

Hot-dipped galvanizing is a physical reaction.

After the chlorhydric acid pool and water pool, the iron wire will go through the drying panel and then enter the zinc stove.

Hot-dip galvanizing is a form of galvanization.

It is the process of coating iron, steel, or aluminum with a thin zinc layer, by passing the metal through a molten bath of zinc at a temperature of around 860 °F (460 °C).

When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O2) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO2) to form zinc carbonate(ZnCO3), a usually dull grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements.

Customized products 2.54mm hot dipped galvanized wire (for making chain link mesh), the tolerance for wire diameter is ±0.02mm.

The weight of per coil is 500kg and the coil inner diameter is 40 to 50 cm.

3.65mm hot dipped galvanized wire (Zinc thickness: min.

85.4g/M2, Wire tolerance ±0.02mm, 500kg/coil)

wire, hot-dipped galvanized iron, 18 Ga ASTM A-641 for new spray shields Material : Low carbon steel wire, medium carbon steel wire and high carbon steel wire.

Tensile Strength: 400--500MPA Hot dipped iron wire Usage: It mainly used in communication equipment, medical equipment and weaving nets, brushes, cables, filters, high pressure pipe, construction, handicrafts and other industries.

Standard wire gauge: 8# - 24#.

(See the below table)

Company Contact:

• Posted By: Loopan Wire Tie Inc

• Phone: +865342328351

• Address: #87 Mingyuan Street, Dezhou, China, Dezhou , shandong , China

• Email:

• Website: https://www.tiewire.net

• Business Description: Producing "tie wire" Is our main field of production which could be considered as the raw material of the other products.
  
  Through over ten years’ development, Loopan Wire Tie Inc.
  
  has become a one of big tie wire company with more than forty sets production and inspection equipment.
  
  We mainly supply full range of tie wire, loop tie wire, rebar tie wire, wire ties, small coil tie wire, u type tie wire straightened cut tie wire, garden tie wire, tying wire, baling wire, binding wire, pvc coated tie wire, black annealed tie wire, galvanized tie wire, stainless steel tie wire, etc.
  
  These products are extensively used in industrial binding, construction wire and daily uses.
  
  With good quality and treatment, our wire products are exported to the USA, UK, Europe and other countries.
  
  All the raw materials are chemically and physically tested before being further processed.
  
  Featuring on quality, our staff has developed tie wire with the treatment of galvanizing, annealing and plastic coating.
  
  Our products can meet the technical requirement from the USA and European Countries and have found a popular market there.
  
  Loopan has the workshops of wire drawing, galvanizing, annealing, coating, cutting and spooling to conduct separately the processing for various tie wire materials.
  
  With the whole processing under quality control, our finished products yield high physical and chemical properties.