Aluminium Sheet 3003 - China

3003 series aluminum sheet is a common product of the aluminum-manganese alloy series.

Due to the manganese alloy element, this product has excellent anti-rust properties, also known as anti-rust aluminum sheets.

The strength is about 10% higher than that of the 1100 series, and the formability, weldability, and corrosion resistance are all good.

It is used for processing parts and components that require good formability, high corrosion resistance, and good weldability, or work that requires both these properties and higher strength than 1XXX series alloys, such as kitchenware, food, and chemical products handling, and Storage devices and tanks for transporting liquid products, various pressure vessels and pipes processed with thin plates, general utensils, heat sinks, cosmetic plates, photocopier rollers, and ship materials.

Characteristics of Aluminium Sheet 3003

3003 is an AL-Mn alloy, which is the most widely used anti-rust aluminum.

The strength of this alloy is not high (slightly higher than that of industrial pure aluminum) and cannot be strengthened by heat treatment.

Therefore, cold working methods are used to improve its mechanical properties: It has high plasticity in the annealed state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, and poor machinability.

Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gas medium, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers, and other small-load parts made by deep-drawing; the wire is used to make rivets.

Scope of application

This product is often used in humid environments such as outer packaging, mechanical parts, refrigerators, air-conditioning ventilation ducts, etc.

The product has good rust resistance.

3003 aluminum plate is often used in ships, navy ships, vehicle materials, automobile and aircraft plate welding parts, pressure vessels requiring strict fire protection, refrigeration equipment, TV towers, drilling equipment, transportation equipment, missile components, armor, etc.

Density formula of Aluminium Sheet 3003

Length (mm)*Width (mm)*Height (mm)*0.00000272 Size of Aluminium Sheet 3003:

- Thickness: 0.2-150mm

- Width: 400-1900mm

- Length: 500-6000mm

Company Contact:

• Posted By: Shanghai T.S. Industrial Co.,Ltd

• Phone: 8615607960723

• Address: No.2, Lane 1588 Youyi Road, Shanghai , China

• Email:

• Website: https://www.lordfintube.com

• Business Description: Shanghai T.S. Industrial Co., Ltd focuses on Finned Tubes, Fin Tube, and Finned Pipe used in Heat Exchangers, Boiler Economizers, Coolers, and Heaters.
  
  We supply custom fin tubes and finned pipes in various material configurations that will increase the heat exchangers' heat transfer rate and reduce operating costs.
  
  With an advanced high-frequency resistance welding finned tube production line, an annual production capacity of up to 4000 tons, the specifications of phi 22-273mm finned tube, according to national standards or customer requirements standard production.
  
  The company produces finned tubes (square fin tube, circular finned tube, spiral fin tube, H type finned tube, longitudinal fin tube, corrugated fin tube, spiral serrated fin tube, needle-shaped fin tube, plate-shaped fin tube, inner fin tube) that can be applied to the boiler, air preheater, etc.
  
  Fin tubes or called finned tubes are a major component for various heat recovery systems.
  
  The close connection between the Finning operation and the manufacturing plant allows significant savings in packaging and freight as well as working capital reduction as a result of a “just-in-time” supply chain.
  
  T.S. Industrial Supply and produce to custom requirement finned tubes.
  
  For high-frequency resistance welding finned tube.
  
  The fin, either solid or serrated, in carbon, alloy, or stainless steel is helically wound around the tube and resistance welded.
  
  For Extruded Finned Tube, the Base tube can be carbon steel, alloy Tube, and stainless steel, while the fin can be aluminum and copper alloy.
  
  Typical product, we also produce extruded serrated finned tubes.
  
  For Bending, We can be on the bare tube and also can be over the fin, is performed on-site with custom-designed duplex benders.
  
  In our typical finned tube supply range, we supply both extruded fin tubes and helical welded finned tubes, which are mainly used for the heat transfer industry.
  
  Specific types such as Embedded Fin Tube also called G Type Fin Tube, L Fin Tube, LL Finned Tube, KL Finned Type also call knurled Finned Tube, Extruded Fin Tubes, Extruded Serrated Fin Tube, Square Fin Pipe also call H Fin Tube, Rectangular Fin Pipes also called Double H Fin Tube, Longitudinal Finned Tubes, Studded Tube and Nailhead Pipe, High-Frequency Welded Serrated Fin Tube, High-Frequency Welded Solid Fin Tube.
  
  T.S. Industrial privately owned company and finned tube manufacturer.
  
  We are not owned by, nor do we own, any steel producers.
  
  Our independence from steel producers ensures that we are objective in matching exact customer needs in terms of quality, specifications, and delivery.
  
  T.
  
  S Industrial provides finned pipes products and services to the power plants, petrochemical industries, boiler & heat exchangers, nuclear stations, paper, shipbuilding sectors as well as refrigerating industries.
  
  Incorporated with manufacturers and fabricators in China, we can supply in accordance with most international standards with high-qualified and cost-effective products.
  
  Our main strength lies in the heat exchanger tubular, especially finned tubes, which can be long up to twenty meters, and usually delivered in U-bent form.
  
  We are confident that our expertise in this field will bring you high-value-added products & services, and we are ready anytime to team up with your finned tube solutions.