17 Singapore 
9 India 
7 Australia 
3 Brazil 
2 Ukraine 
2 China 
2 UK 
1 Latvia 
1 Vietnam 
1 Philippines 
1 Germany 
aisi 4130 heat treatment parameters Photos Catalog - page 5 - WorldBid B2B Market
-
Optimizing Heat Treatment Processes For Din C45 Material ComponentsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - October 22, 2024 - 198.00 Dollar US$the following are methods for optimizing the heat treatment process of din c45 material parts: i. quenching treatment 1. **select appropriate quenching medium**: 2. **control quenching temperature and time**: 3. **use graded quenching or isothermal q...
-
Heat Treatment M35 Steel Sheet Plate Supply RangeManufacturing Plants - Dongguan Songshun Mould Steel Co., Ltd. - China - June 14, 2023 - check with company for pricem35 steel annealing process if you case it up for the annealing after the forging, you will get a better result. if you can not do that, just make it cold to the indoor temperature then make it in. about the annealing process, just put it in the stov...
-
Heat Treatment Basket Casting Parts With Cr25ni14 For Annealing Furnaces EbManufacturing / Casting - Mr.John Liu - China - June 8, 2014 - contact company for priceHeat- treatment Basket Casting Parts with Cr25Ni14 for Annealing Furnaces EB3018 Material Grade: Cr25Ni14; Quality Level: As per National Standard & International Standards. Production Process: Investment Process & Centrifugal Process & Sand Process ...
-
Iso X153crmov12 Steel Heat Treatment The Hardness Can Reach 60hrcMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - June 3, 2024 - 201.00 Dollar US$iso x153crmov12 steel is a tool steel with a carbon content of 1.5% and a chromium content of 11.5%. after heat treatment, the hardness can reach 60hrc. it is a semi-stainless steel with good wear resistance and moderate toughness. the disadvantage i...
-
Heat Treatment Technology 410 Material Steel Annealing And HardeningMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - June 3, 2024 - 871.00 Dollar US$annealing of 410 material annealing temperatures for wrought 410 stainless steel: 1. process (subcritical) annealing: air cool from a temperature of 650-760°c (1200-1400°f). maximum softness is achieved by heating to a temperature at the upper end of...
-
High Strength 5120h Steel Optimized Heat Treatment ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 21, 2025 - 801.00 Dollar US$5120H steel is a high-strength, high-toughness alloy steel with excellent tensile strength, fatigue strength and wear resistance. It is widely used in automobiles, construction, ships, machinery and other fields. This article will introduce the heat ...
-
Small Heat Treatment Deformation T15 Steel Processing TechnologyMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - March 25, 2024 - 990.00 Dollar US$t15 high speed steel heat treatment t15 high speed steel mainly adopts vacuum induction melting or electric arc furnace melting, vacuum refining, forging, heat treatment and other processes, and the correct heat treatment process can ensure that it o...
-
Din 55nicrmov7 Steel Main Heat Treatment Process StepsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 7, 2025 - 516.00 Dollar US$DIN 55NiCrMoV7 steel is a medium carbon alloy die steel with high hardness, good toughness and wear resistance. It is widely used in the manufacture of molds and mechanical parts in high load, high impact and high wear environments. It can obtain exc...
-
Songshun Supply Inconel 600 Heat Treatment Technical SupportMetals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 12, 2024 - 1602.00 Dollar US$inconel 600 is a high temperature and corrosion resistant nickel-based alloy widely used in high temperature and oxidizing environments. its heat treatment process mainly includes solution treatment and aging treatment. the following are the heat tre...
-
Songshun Adequate Supply 42crmo4 Qt Important Heat Treatment ProcessesMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - July 15, 2024 - 903.00 Dollar US$42crmo4 qt is commonly found in various industrial fields, including automobile manufacturing, mechanical engineering, mining equipment and the oil industry. in these fields, it is used to manufacture bearings, crankshafts, connecting rods, gears and...
-
Jis Sncm220 Material Processing And Heat Treatment Optimization SuggestionsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - March 23, 2025 - 782.00 Dollar US$JIS SNCM220 material process optimization suggestions Pretreatment: Normalizing (900℃ air cooling) is required after forging to refine the grains and reduce subsequent heat treatment deformation. Carburizing treatment: The surface carbon concentratio...
-
Heat Treatment 42crmo Steel Round Bar Performance CharacteristicsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - March 2, 2025 - 601.00 Dollar US$42CrMo steel round bar is a commonly used alloy structural steel round bar material. Performance characteristics: High strength: After proper heat treatment, the tensile strength of 42CrMo steel round bar is ≥1080MPa, the yield strength is ≥930MPa, a...
-
Smelting Rolling Heat Treatment 1 2312 Steel Manufacturing ProcessMetal Manufacturing - Dongguan Songshun Mould Steel Co., Ltd. - China - December 6, 2024 - 692.00 Dollar US$1.2312 steel is a commonly used die steel. the following is a detailed introduction to its manufacturing process (1.2312 steel manufacturing process): i. steelmaking 1. raw material preparation 2. usually arc furnace smelting or induction furnace sme...
-
Astm 5140 Steel Heat Treatment Process Mature TechnologyMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - May 6, 2025 - 911.00 Dollar US$ASTM 5140 steel heat treatment process Heat treatment is a key link in the precision machining of ASTM 5140 steel. The main processes include annealing, normalizing, quenching and tempering: Annealing: Usually carried out at around 790℃, followed by ...
-
Strict Heat Treatment Process P20 S Steel Complete MaterialMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - December 6, 2024 - 875.00 Dollar US$p20+s steel is a tool steel commonly used in mold manufacturing, with good toughness and wear resistance. its heat treatment process generally includes the following steps: 1. preheating: before heating, preheat the p20+s steel to about 300-500°c to ...
-
En Bs Na14 Steel Optimize Heat Treatment Process To Improve Its PerformanceMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - August 26, 2024 - 1001.00 Dollar US$en/bs na14 steel plays an important role in the industrial field with its excellent comprehensive properties. understanding its chemical composition, mechanical properties and processing methods is essential to ensure that the material performs well ...
-
Spot Supply 30crnimo8 Steel Plate Heat Treatment ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 10, 2025 - 511.00 Dollar US$common heat treatment processes for 30crnimo8 steel plates include quenching, tempering, etc. ##quenching heating temperature: generally heated to 850-870℃. within this temperature range, the structure of the 30crnimo8 steel plate can be fully austen...
-
Good 1cr23ni60fe13al Alloy Material Durable For Heat Treatment EquipmentMetals - Alloy Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - September 23, 2024 - 803.00 Dollar US$1cr23ni60fe13al alloy material is a high temperature resistant alloy material, mainly used in heat treatment equipment and applications in high temperature environments. this alloy has excellent heat resistance, oxidation resistance and corrosion res...
-
Din 1 7147 Steel Post Forging Heat Treatment ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 21, 2025 - 816.00 Dollar US$DIN 1.7147 steel post-forging heat treatment Annealing treatment (recommended process): Heating temperature: 860~880℃, keep warm for 2~3 hours, cool down to below 500℃ with the furnace. Purpose: eliminate forging stress, refine grains, reduce hardnes...
-
Sand Casting Heat Treatment Hammers Used In Rock Crushers IndustryGeneral Construction - Ningbo Longyi Machinery Imp & Exp Co., ltd - China - December 13, 2012 - contact company for priceUsed in rock crushers industry Material is ASTM A128-A, it is make from sand casting process Wearable, heat-resistant, it do the water quench heat treatment Packing: put the goods in wood case, which wood case is make from the three ply wood, it is n...