Kettle Inspection Services And Quality Control - China

The pre-shipment Inspection takes place when the merchandise is 100% completed, and at least 80% of the products are packed, marked.

Our inspectors randomly draw some samples from finished goods, based on statistical random sampling technique, commonly known as ANSI/ASQC Z1.4 MIL-STD-105E, BS6001, DIN 40080, ISO2859 or NFX06-022, to verify that the finished shipping lots conform to the client’s specification, order, L/C, reference samples, etc.

The main aspects checked for PSI:

·Quantity check ·Appearance check : size, color, shape, to check if there is dirt, scratches, burr, etc ·Style, color & material check ·Workmanship check ·Function/safety check ·Size measurement if needed ·Package details check: shipping marks, label, hangtag, manner of packing, packing qty, safety of packing, etc ·Related on-site test: it depends on the product to decide which on-site tests will be applied, such as size checking, function checking, drop test, etc.

This check is conducted during the very early stages of the production process (between 0 and 20%).

The purpose of the check is to inspect the process parameters and to verify that the final product will meet the desired quality requirements.

We are humans and naturally humans make mistakes, so do factories in China.

About half of the factories in China have production issues.

If no strict quality check is performed, factories will make according to their standard.

That is why to determine the faults earlier is a time and cost saving process, when you figure out the problems when all goods are finished, it will waste lots of time and money to revise.

In our experience, we did a quality control while the production just had started, we figured out the color the factory used was totally different from what the customer wanted.

This is a major fault.

After check up, the factory revised the color immediately.

If we performed a quality check after the products are almost finished, this could be a major issue and the shipment will be delayed due to the revision of the issues found at the quality control.

So it is strongly recommended to do a quality check in the early stage of the production process.

This quality control is required in China especially to avoid misunderstanding and faults in the further production process.

Company Contact:

• Posted By: Guangdong Huajian Inspection Services Co., Ltd

• Phone: 86 15800000705

• Address: Room 301-1623, Building 6, No.18 Kelin Road, Tianhe District, Guangzhou , Guangdong , China

• Email:

• Business Description: Established in 2009, HQC Inspection Services Co., Ltd., one of the leading third party quality control service providers in China, has been providing product inspection, plant /supplier evaluation, project quality management, product testing, as well as quality engineering consultation to our clients worldwide.
  
  We are committed to :
  
  assist you in building / improving your quality control system by finding out problems and offering professional solution to reduce your risk and damage
  
  educate your suppliers by offering them professional advice to upgrade their ability and mindset of production and quality assurance
  
  HQC quality technical service type:
  
  Product quality control:
  
  Product inspection
  
  Industrial product inspection
  
  Full inspection
  
  Loading supervision
  
  Testing
  
  Produ ct audit
  
  Process audit
  
  Design, making and verification for gauge
  
  Damage investigation
  
  Supplier management and development:
  
  Factory evaluation
  
  Trade company evaluation
  
  Diagnosis and optimization for management system
  
  Project quality management
  
  Quality engineering consulting
  
  Management consulting
  
  GENERAL INSPECTION POINTS:
  
  - Product description, specs and customers requirements
  
  - Measurements check
  
  - Quantity verifying
  
  - Packaging and drop tests
  
  - Labels & markings, Logos check
  
  - Aesthetic, surface and function check
  
  - Function check and testing