Pre Shipment Glasses Inspection Service For Chinese Third Party Products - China

The in-process quality check is designed to provide early warning of quality or other problems arising during production and which may delay shipment.

In other words, it is intended to provide a snapshot of the status of production at a factory.

During production, semi-finished parts must be inspected based on AQL or percentage according to the company policy and inspection plan.

Checks carried out include stocks of raw materials, production rates, estimated production completion date, production bottlenecks, etc

Pre-production inspection is to be conducted at the beginning of production or even before the start of manufacturing.

During-production inspection is to be conducted when 10%-15% of the production is completed.

Pre-shipment inspection takes place when the merchandise is finished, packed and ready for shipment.

Sampling is implemented in accordance with the internationally recognized acceptance sampling standards, e.g. ISO2859/ANSI/ASQCZ1.4 /BS6001/DIN40080/NFX06-02 2, etc.

Full inspection is 100% inspection for products, which is carried out before or after packing.

Based on clients' requirements, we will check product piece by piece on appearance, workmanship, function, safety and etc.

Loading supervision is a loading process control when the products are being loaded into the container.

inspection service Our duties Your benefits

Pre-Production Inspection Check the raw materials and components used in production; Sample and test semi-finished products to detect potential defects; Evaluate the quality system of the production line; Assess the management and ability of production equipments; Assess the production capacity of the manufacturer; Provide technical advice to the factory to improve product quality and minimize defects; Assess production schedule.

Find existent and potential problems before mass production to avoid unnecessary loss.

Ensure consistence of product specification and production schedule.

During Production Inspection Sample and evaluate the products for safety, performance, design, function and appearance; Check for any defects and deviation from clients' specifications and/or given samples; Evaluate the packing methods and packing material; Check and evaluate the quality management of production line; Evaluate the production progress against the schedule and predict if the shipment is on schedule; Give practical and effective advices to improve quality in accordance of the findings It is suitable for control of the production quality during the mass production.

Ensure that the progress, production cycle and the quality meet clients' requirements through as early as possible discovering and processing the quality problems.

Pre-Shipment Inspection Check quantity, accessories, assortment, labeling, shipping mark, etc.

against the purchase order, given samples and technical documents; Sample and evaluate product for safety, design, function, appearance, and performance; Check for any defects and deviation against the technical standards or requirements; Assess packaging form.

It is the final inspection with which you are be able to decide to accept the batch/lot of the merchandise or not.

Full inspection Appearance check; Workmanship check; Function check; Safety check; Other special checking points.

All defective products will be sorting out, qualified products which pass inspection will be packed (or re-packed)into carton and sealed with GIS label.

It ensures that each product delivered meets our customer's specified quality requirements.

Loading supervision Check the container condition; Verify the products loaded; Closely monitor the loading process; Verify the quantity; Ensure proper handling of the goods and proper stack in the container; As soon as the inspection is finished, the container will be sealed with the shipping line seal.

And seal number is recorded in the loading report.

Ensure that the intended goods and quantity loaded into the container are in accordance with your purchase order in aspects of reality, completeness and correctness.

Products we inspect include: 1 - Electrical & Electronic products -Electrical household products, Entertainment Electronics, audio & visual, Telecommunications, Home security and alarm systems, Beauty & Care products, Lighting, etc.

2 - Softgoods - Apparel, Garment, Fashion, Accessories, Footwear, Textiles, Leather, Luggage & Bags, Bedding, Curtain/Towel, etc.

3 - Hardgoods, - Furniture & Fixtures, Kitchenware, Home Products, Giftware, Ceramic/Porcelain, Marble/Stone, etc.

Company Contact:

• Posted By: Guangdong Huajian Inspection Services Co., Ltd

• Phone: 86 15800000705

• Address: Room 301-1623, Building 6, No.18 Kelin Road, Tianhe District, Guangzhou , Guangdong , China

• Email:

• Business Description: Established in 2009, HQC Inspection Services Co., Ltd., one of the leading third party quality control service providers in China, has been providing product inspection, plant /supplier evaluation, project quality management, product testing, as well as quality engineering consultation to our clients worldwide.
  
  We are committed to :
  
  assist you in building / improving your quality control system by finding out problems and offering professional solution to reduce your risk and damage
  
  educate your suppliers by offering them professional advice to upgrade their ability and mindset of production and quality assurance
  
  HQC quality technical service type:
  
  Product quality control:
  
  Product inspection
  
  Industrial product inspection
  
  Full inspection
  
  Loading supervision
  
  Testing
  
  Produ ct audit
  
  Process audit
  
  Design, making and verification for gauge
  
  Damage investigation
  
  Supplier management and development:
  
  Factory evaluation
  
  Trade company evaluation
  
  Diagnosis and optimization for management system
  
  Project quality management
  
  Quality engineering consulting
  
  Management consulting
  
  GENERAL INSPECTION POINTS:
  
  - Product description, specs and customers requirements
  
  - Measurements check
  
  - Quantity verifying
  
  - Packaging and drop tests
  
  - Labels & markings, Logos check
  
  - Aesthetic, surface and function check
  
  - Function check and testing