Die Cast Housing Manufacturers Introduces The Relevant Knowledge Of Led Floodlights - China

Die-Cast Housing Manufacturers introduced that when talking about the quality of LED floodlights, we have to talk about the parameters of LED floodlights.

Parameters help us understand product quality.

The CRI of LED flood light: The higher the CRI, the more expensive, the higher the CRI, the lower the luminous flux, which is known to all in the industry.

Generally, high-CRI LED floodlights must be used on important occasions, and the current range is generally between 75-85 - The luminous flux of the LED floodlight: the amount of light emitted per unit time becomes the luminous flux, the unit is lumens (lm), and the data is measured by the integrating sphere.

This is a parameter that customers are very concerned about.

The color temperature selection of LED flood light: the color temperature is generally between 2700-3500K is warm white light, 4000-5500K is natural white light, and 6000-7000K is positive white light.

The specific color temperature used depends on the applicable place.

Power supply: LED constant current power supply, the higher the current, the higher the temperature, so the general real engineer will choose the appropriate current adjustment so that the temperature of the lamp is controlled within 60 degrees.

LED flood light driving power, light source chip, housing, and production process are the main factors that affect product quality.

The power supply is like the heart of the lamp, which determines the life of the projector.

The better the chip quality, the brighter the lamp.

The quality of the power supply and chip of the led floodlight can be determined by its brand.

The quality of the LED floodlight housing affects the heat dissipation, waterproof and dustproof degree of the product.

Outdoor high-power LED floodlights should have a waterproof and dustproof rating above IP65 - For the production process, you can check whether the appearance of the LED floodlight is fine, and only a good process can produce a good product.

Company Contact:

• Posted By: ninghaiyuchen

• Phone: 125369845787

• Address: No. 225 Tanshu Road, Ninghai, Ningbo City, Zhejiang Province, Ninghai , China

• Email:

• Website: https://www.cnledstreetlight.com/

• Business Description: Ninghai Ethan Lighting Technology Co,.
  
  Ltd. is an aluminum die-casting LED street lamp mold development, design, production and sales company.
  
  The address is located in Ninghai Mould City, Ninghai County, Zhejiang Province.
  
  It has more than 7 years experience in the design and production of aluminum die-cast lamp housing.
  
  We have our own mold design.
  
  Division, die casting machine, spray line, assembly workshop and various supporting facilities.