Antistatic Powder Coating - China

Introduction:

Made of antistatic materials, suitable for indoor and outdoor environments Features:

The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.

It can resist static electricity for a long time.

Use: Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.

Application parameters:

Curing time: 200℃×10–15 minutes Spraying method: High voltage electrostatic spraying 60-80 KV Recommended film thickness: 60-80 um Physical Properties：

Pencil Hardness: Pencil Hardness Tester, Standard ≥ H, Test Method GB/6739 Impact Resistance: Impact Tester, Standard ≥ 50 kg.

cm, Test Method GB/T 1732 Bending Resistance: Bend Tester, Standard ≤ 2 mm, Test Method GB/T 6742 Adhesion: 100-grid test, Standard Level 0 - Test Method GB/T 9286 Cupping Test: Cupping Tester, Standard ≥ 6 mm, Test Method GB/T 9753 Chemical Properties：

Salt Spray Resistance: ≥ 500 hours, ≥ Level 9 - Test Method GB/T 1771 Humidity and Heat Resistance: ≥ 1000 hours, Slight Gloss Loss, Test Method GB/T 1740 Weather Resistance (Outdoor Products): Accelerated Weathering (QUV-B313) for 240 hours, Standard ≥ Level 3 - Test Method GB/T 1865 The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um.

The performance indicators of the coating will vary slightly with the gloss.

This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.

Storage conditions: Store in a dry, ventilated room at around 25°C, avoid direct sunlight.

Under this condition, the powder can be stored for 6-12 months.

If it is overdue, it can be re-tested and can still be used if the results meet the requirements.

Note: The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application.

The results may vary depending on environmental factors and other conditions.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.