Blue Flash Silver Color Powder Coating - China

COLORS AVAILABLE

RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available GENERAL TYPES

Polyester /Hybrid powder coating Epoxy Powder coating color Metallic powder coating color Hammer tone color powder coating Texture color powder coating powder Textures include sand grain, hammer, silk pattern, sand textured, marble, metallic, multi-color.

PHYSICAL PROPERTIES

Specific gravity : 1.2 ~ 1.8g/cm3 up to colors Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted) Level of liquidity: 24 ~ 27 mm CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate).

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.

Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.

Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.

Proposed operators wear appropriate dust mask, glasses.

If possible, try to avoid long-term skin contact with powder coating Mechanical property

Testing items Standards and methods Inspecting index

Impact strength GB/T1732-1993 - AS3715 2.8 >50kg/cm

Bending resistance GB/T1185-88 - AS1580 402.1 - ISO9227 Pass 2-5 millimeters

Adhesion CHECKED TEST GB/T9286-88.2mm Cross cut, ISO2409 Pass100/100 - passes 0 levels

Cupdrawing: Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters

Pencil hardness GB/T6739-86 Pass H-2H

Chemical resistance and weather resistance

Salt spray test GB/T1771-91.500 hours The cross section of corrosion less than 2MM

Hot and damp resistance test GB/T17740-79(89), 1000 hours Without air bubbles, loses the light slightly

Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage

Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage

Heat resistance 200degree, 1 hour The color change is lower than E=1.5

Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage

Uvioresistant QUV-313.500 hours Gloss higher than 80% lower than the

Munsell color change level Water tolerance of 2 hours No bubble, not falling, losing light If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.