Epoxy Anti Corrosion Powder Coating - China

Product Introduction:

This product is formulated using special epoxy resin and functional curing agents.

It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.

Product Usage:

Municipal, water supply, drainage, sewage, circulating water, chemical, and power plant pipelines.

Product Features: Excellent adhesion to the substrate.

Good leveling and high gloss on the coating surface.

Strong resistance to permeation and corrosion.

High surface hardness and dense coating.

Superior high-temperature cathodic disbondment resistance.

Good mechanical properties and extremely strong flexibility.

Low melting temperature, high reactivity, and high curing completion rate.

Powder Performance: Property Specification Notes

Adhesion Excellent Leveling Good, high gloss Corrosion Resistance Superior Surface Hardness High Cathodic Disbondment Resistance Excellent at high temperatures Flexibility Extremely strong Temperature Resistance Good performance in high and low temperatures Curing Conditions: Property Specification Notes

Temperature 200-230°C for 3-1.5 minutes (medium-frequency heating) Deviations may affect performance Application Parameters: Parameter Specification Notes

Applicable Equipment Frictional charging spray, corona electrostatic spray, dip coating, roll coating Film Thickness 150-450um Adjustable according to workpiece requirements Health and Safety: Property Specification Notes

Toxicity Non-toxic Flammability Non-flammable Regulation GB15607-1995 Coating operation safety regulations Precautions: Item Specification Notes

Outdoor Use Not recommended May cause fading and chalking

Surface Preparation Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives Preheating Temperature controlled between 180-230°C Storage Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed Curing Temperature Preheat steel pipe surface to above 200°C for better curing completion rate Compliance Standards:

SY/T 0442-97 “Technical Standard for Internal Coating of Steel Pipelines with Fusion-Bonded Epoxy Powder” If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon.

20+ years of chemical manufacturing & export experience, a partner you can trust.

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: +86-21-64208466-808

• Address: Floor 2, #47 Building, 280 Jiugan Road, Songjiang district, Shanghai, China, Shanghai , Shanghai , China

• Email:

• Website: https://moutainchem.com/

• Business Description: Standard International Group (HK) Limited was founded in 2003 - Over years, Standard Group has established long-term strategic cooperative relations with many well-known industrial chemical manufacturers, such as Sherwin-Williams, LANXESS, Evonik, Covestro, Elementis and so on, thus ensuring that customers can receive consistent high-quality services.
  
  Years of professional accumulation make us not only provide high-quality industrial coating additives, but also medicine Pharmaceutical Intermediates and electronic chemistry.
  
  From the painting plant laboratory first sample testing, middle-testing and final-testing, we adhere to the professional, sincere, enthusiastic and efficient service concept, our technical team always adjust the sample during different testing process until it performs perfect chemical reaction at customer’s paints.