Frequency Converter 60hz 50hz 400hz - USA

If its an AC frequency converter whose nameplate indicates three phase

50Hz/ 60Hz or 400Hz.

Then its possible to change from parallel star to

series star or vice versa ( RESTRAPPING) .

But if the plate indicates

single phase 60Hz to 50Hz frequency converter, I don' t think its

possible based on the 120 degrees displacement concept between phases.

I think by relieving and more researches any impossibility can be possible and that note I consider the theoretically aspect of 50Hz/ 60Hz frequency converter example Single Phase to be rectified to DC, the output DC to be converted / inverted to 3- Phase AC.

Anyway, besides limited scope, there are limitations of power.

The efficiency is too low for extended uses.

Can only be an emergency solution.

From the simple capacitor to sophisticated 60Hz to 50Hz frequency converters performance increase, suitable the price.

Technical efficiency in opposition to financial.

Are usually more handy three phase AC sources.

Company Contact:

• Posted By: Frequency Converter 60Hz 50Hz

• Phone: 17245883332

• Address: 616 Mercer Rd., Greenville , MS , USA

• Email:

• Website: http://www.frequencyconverter.net

• Business Description: A simple 60Hz to 50Hz frequency converter can be created by connecting
  
  two phases of a 3 phase motor (unloaded) to a single phase source and
  
  connecting the correct amount of capacitance between the two phases of
  
  power supply and the third phase of the three phase motor.
  
  Output is
  
  determined by the 3 phase motor HP.
  
  A single phase to 3 phase frequency
  
  converter can be used with matching capacitor to phase shift your load
  
  is fine for small, lets say less that 2 kW loads.
  
  Plenty of home hobbies
  
  to, do this as they buy a 2nd hand industrial rated drilling machine for
  
  their basement, but 3 phase rated, against a single phase 110V 60Hz to
  
  220V 50Hz frequency converter installation.
  
  Use GoHz single phase to three phase 60Hz to 50Hz converter.
  
  In which you have to give 1 phase 50Hz/60Hz power source to rotor of generator and output will be 3 phase from stator.
  
  Only thing is that this converter generator should be design in winding in such a way so that rotor winding will induce 3 phase 50Hz/60Hz supply from stator.