Bending Tester Std Fb2 S - China

Compliance Standards

ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flexure) IEC 62133-2 (Battery Module Bending) EN 1170-5 (GRC Flexural Testing) Technical Parameters

Parameter Specification

Force Range 0.1N - 2000N (±0.5%)

Deflection Accuracy ±1μm @ 10mm span

Test Speed 0.1 - 500 mm/min

Support Spans 10-500mm (adjustable)

Bending Radius 0.5-100mm (±0.01mm)

Angular Resolution 0.01°

Key Features

3-point & 4-point bending configurations Real-time curvature measurement system Automatic neutral axis calculation High-speed strain mapping (1000 fps) Multi-stage bend/reverse bend cycles Test Capabilities

Test Type Standard Parameters

Flexural Modulus ASTM D790 2% strain limit

Bending Fatigue ISO 12106 10⁷ cycles @ 20Hz

Springback Analysis SAE J2748 180° bend + release

Measurement System

Dual-axis load cell (Fz + Mx) Laser-based deflection tracking Surface strain mapping via DIC Real-time moment-curvature plots Standard Configuration

Stiffness-rated frame (100kN/m) Interchangeable rollers (R1-R50mm) TestXpert III analysis software 2000N capacity load cell Automotive Options

Battery pack torsion simulation Seat structure cyclic loading Door seal compression-bend Thermal cycling (-40°C to 150°C) Safety Systems

Over-moment protection Emergency roller retraction Specimen ejection detection Automatic force dump circuit Implementation Notes

Calibrate per ISO 5893 (Roller alignment) Maintain 40-60% RH for polymer tests Use alignment jig for multi-layer stacks Ground isolation for electronic components

Company Contact:

• Posted By: Standard International Group (HK) Limited

• Phone: 18355172336

• Address: No.2578 Gu Dai road, Min Hang district, Shanghai, shanghai , Shanghaai , China

• Email:

• Website: https://www.standard-groups.com/en/

• Business Description: Standard Groups is an integrated supplier specialized in providing material test instruments and “The Whole Laboratory Program” solutions.
  
  The main products cover many areas: Textile and Apparel, Leather and Footwear, Flammability Testing, Filter Material Testing, Automotive Interior, Toy Testing, Non-woven and Geo-membrane, Carpet Testing, Luggage/Furniture/Office Furniture Testing, Material and Parts of Automotive, Weathering and Light Stability Testing, Ovens and Environmental Testing Chambers, Salt Fog Chambers, Materials Testing Machines, 3D Body Scanning and Manikin, Air Quality Monitoring and Measurement, Package Material Testing, Electrical Safety Testing, Optical and Spectroscopy Instruments, Lighting and Color Assessment, Microscopy and Legal Inspection, and relative testing services.