Pci Laser Control Card 502p Engraving Main Marking Board Equipment - China

502P board is specifically used for laser marking.

Using PCI bus, the

marking is fast and stable.

With MarkingMate software, it can achieve a

variety of combinations.

Support the control of lamp pumped ,

semiconductor ( end-pumped and side-pumped ) , and CO2 laser marking

system.

It supports analog galvanometer and supports most of engraving

applications as well, like static marking on flat, small spherical

surface or small camber surface with complex graph.

Some reserved I/O

pins could connect with rotary axis device to perform rotary axis

marking.

502P is a truly good C/P value card for general laser marking

application.

502P main board

Dimension: 119.9mm x 91.0mm

Support Windows 98/2000/XP/Vista/Windows 7

2 channel high speed, precision 16bit DAC for galvanometer control (Default)

OptionalOptional 3rd and 4th 16 bits high speed precision D / A channel; can be controlled as a YAG laser power, or as a dynamic focus control, or other applications that require D / A control aspects;(Only 502P + board has this function)

Default has 19 switching outputs (TTL level, DO12 to DO15 have photo coupling isolation), they can control auxiliary equipments of laser marking control system, like laser power, acousto-optic power, rotary axis, XY table, solenoid valve etc

OptionalThere are another optional 5 channels switching outputs (TTL level, DO19 to DO23 have photo coupling isolation) , they can control auxiliary equipments of laser marking control system, like laser power, acousto-optic power, rotary axis, XY table, solenoid valve etc.

(Only 502P + board has this function)

Default has 16 channels switching inputs (TTL level, DI0 to DI15 have photo coupling isolation), they can connect with input signals of pedal switch and other auxiliary equipments.

OptionalThere are another optional 8 switching outputs (TTL level, DO16 to DO23 have photo coupling isolation) , they can connect with input signals of pedal switch and other auxiliary equipments.

(Only 502P + board has this function)

Default has 1 PWM signal, the frequency and duty ratio can be set by software, used for acousto-optic modulation and CO2 laser control.

Default has 1 32-bit hardware timer, can be worked with software to perform mark on the fly.

Note：The functions with “optional” word is only for 502P+ board in above statements, the normal 502P board doesn't support it.

Warning：502P doesn’t support hot-plug, or the board will be burnt out.

Company Contact:

• Posted By: Kingyu Software

• Phone: 8613616215571

• Address: NO.601 LiSheng Building, NO.60 Suli Road, Wuzhong , Suzhou , China

• Email:

• Website: http://www.kingyukg.com

• Business Description: involved in international trade import export of goods, products, and services