12 Singapore 
5 Canada 
4 UK 
3 Australia 
2 China 
2 India 
2 Turkey 
1 Ireland 
1 Brazil 
1 Cambodia 
atmosphere controlled vertical quenching furnace lab research Photos Catalog - page 4 - WorldBid B2B Market
-
Skaln High Speed Quenching OilLubricants - SKALN Oil（Chongqing）Co.,Ltd - China - September 10, 2019 - 525.00 Dollar US$Product Description: SKALN High Speed Quenching Oil adopts deep refined mineral oil as base oil. And it add many multifunctional additives. It's suitable for quenching neutral material and poor hardenability materials under the protection. Product Pa...
-
Quenching And Tempering Gb 34crnimo Steel Superior MaterialsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - July 1, 2024 - 882.00 Dollar US$after quenching and tempering treatment, gb 34crnimo steel material, the hardness is 36-40hrc, the tensile strength σ b is 1100 mpa, the elongation δ is 12%, the impact toughness value α - κ is 8kg/cm2 heat treatment: the quenching and tempering proc...
-
Din 55nicrmov7 Material Quenching And Tempering ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 7, 2025 - 524.00 Dollar US$Quenching process The quenching process of DIN 55NiCrMoV7 material is usually oil quenching or water quenching. The quenching temperature is generally between 860-880℃, and the holding time depends on the thickness and size of the workpiece. The sele...
-
Quenching Medium Oil Cooling Characteristics TesterPetroleum - Equipment - Changsha Friend Experimental Analysis Instrument Co., Ltd - China - July 24, 2018 - 8000.00 Dollar US$FDH-2801 (Heat treatment) quenching medium oil cooling characteristics tester Scope This instrument is widely used in standard laboratory conditions, under production conditions on the shop floor cooling medium, the cooling bath monitoring, comparati...
-
Quenching Tempering Aisi T4 Steel Warehouse SupplyMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 7, 2024 - 903.00 Dollar US$t4 high speed steel heat treatment 1.quenching fir st, t4 high speed steel is preheated, usually at a temperature of 800-870°c, and then heated to the critical quenching temperature, at a temperature of 1220-1250°c (quenching furnace), 1270-1290°c (s...
-
Skaln High Speed Quenching Oil EngineAutomobile - Filters - Oil - SKALN Oil（Chongqing）Co.,Ltd - China - June 5, 2019 - 730.00 Dollar US$Selection of high-quality heterogeneous dewaxing base oil and a variety of functional additives carefully prepared, with heavy, wear, clean, environmental and other properties. Excellent low temperature start performance, very low oil consumption, lo...
-
Vulcanized Fibre Tube Tubing Arch QuenchingComponents - Fuses - Mudanjiang tip top - China - November 26, 2015 - contact company for priceVulcanized fiber tube is manufactured by winding zinc chloride treated paper on making mandrel to the predetermined wall thickness. They are then going through puring, drying, rolling, grinding, and sanding processes to get desired inside and outside...
-
Outstanding 1 7147 Steel Carburizing And Quenching TreatmentMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - April 21, 2025 - 800.00 Dollar US$1.7147 steel heat treatment process Carburizing and quenching (typical process): Carburizing temperature: 880-980℃ (diffusion depth 0.5-2.0mm) Quenching: 860℃ oil quenching (surface martensite, core bainite + ferrite) Tempering: 150-200℃ (stress reli...
-
Offer 40cr Materials Quenching And Tempering PrecautionsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - May 6, 2025 - 710.00 Dollar US$Precautions in quenching and tempering of 40Cr materials Heating rate control: During the quenching and heating process, the heating rate should be controlled to avoid excessive temperature differences between the surface and the core of the workpiec...
-
Various Specifications 41cr4 Steel Purpose Of Quenching And TemperingMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - May 6, 2025 - 916.00 Dollar US$Purpose of quenching and tempering of 41Cr4 steel Improve strength and toughness: After quenching and tempering, 41Cr4 steel has high strength while maintaining good toughness. This combination of high strength and toughness enables it to withstand l...
-
Skaln Hf 1020# Quench Fast Quenching OilLubricants - SKALN Oil（Chongqing）Co.,Ltd - China - September 10, 2019 - 467.00 Dollar US$SKALN 1020 rapid quenching oil is a base oil obtained by vacuum distillation of refined petroleum oil, dewaxed, solvent refined, and refined by white clay. It is prepared by adding a composite additive such as an anti-oxidation, a refrigerant, and a ...
-
Skaln Hf 3012# Step Austempering Quenching OilLubricants - SKALN Oil（Chongqing）Co.,Ltd - China - September 10, 2019 - 584.00 Dollar US$
Skarampruit isothermal graded quenching oil is a base oil obtained by vacuum distillation of refined petroleum, dewaxed, solvent refined, and refined by white clay. It is prepared by adding a composite additive such as anti-oxidation, chilling agent ...
-
High Frequency Diathermy And Quenching Power SupplyEquipment - Electrical - Switches - Jiangsu Eastone Technology Co.,Ltd. - China - October 26, 2014 - contact company for priceI. Product Introduction As a medium- frequency induction heating power supply, high- frequency inverting diathermy and quenching power supply series adopts three- phase bridge rectification power supply, IGBT power device full bridge inverting and lo...
-
High Frequency Induction Hardening And Quenching EquipmentMetal Manufacturing - Zhengzhou Gous Electromagnetic Induction Heating E - China - December 29, 2015 - contact company for priceInduction hardening is a form of heat treatment in which a metal part is heated by induction heating and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardenin...
-
Annealing Quenching Tempering Aisi M4 Steel Production SpecificationsMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - March 24, 2024 - 1008.00 Dollar US$m4 high speed steel heat treatment (1) thermal processing specifications the starting temperature is 1040~1150℃ and the ending temperature is 930℃. (2) annealing specifications usually, the annealing temperature of m4 high-speed steel is controlled a...
-
Small Deformation During Quenching 42crmo4 Heat Treatment ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - July 15, 2024 - 906.00 Dollar US$42crmo4 heat treatment is a commonly used low-alloy high-strength steel that is widely used in the engineering field. proper heat treatment of 42crmo4 steel can significantly improve its mechanical properties, including hardness, strength and toughne...
-
Heat Treatment 1 2311 Steel Annealing Quenching TemperingPlastic - Raw Materials - Dongguan Songshun Mould Steel Co., Ltd. - China - November 6, 2023 - contact company for priceheat treatment 1.2311 steel 1. soft annealing specifications annealing temperature is 710~740℃, slow cooling in the furnace, hardness ≤235hb. 2.quenching and tempering specifications quenching temperature is 840~870℃, oil cooling or 180~220℃ salt bat...
-
Superior Materials Quenching Treatment Hss Skh59 Specific ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - November 18, 2024 - 898.00 Dollar US$hss skh59 quenching treatment preheating stage: hss skh59 has a high alloy element content and poor thermal conductivity. in order to reduce thermal stress, it needs to be preheated twice. the first preheating temperature is 500-600°c, and the second...
-
En10083 3 51crv4 1 8159 Quenching And Tempering Alloy Steel PlatesSteel - Hot Rolled - BBN Steel Group - China - December 1, 2019 - contact company for priceEN10083-3 51CrV4 (1.8159) quenching and tempering alloy steel plates have good mechanical properties and process properties as well as high hardenability. The adding of vanadium can refine grain of 51CrV4 spring steel, reduce thermal sensitivity, imp...
-
Reliable Guarantee 40cr Steel Pipes Quenching And Tempering ProcessMetals - Steel - Dongguan Songshun Mould Steel Co., Ltd. - China - February 25, 2025 - 789.00 Dollar US$40cr steel pipes quenching purpose: to achieve high hardness and strength. process:heat the steel plate to 830-850°c. hold for 30-60 minutes. quench in oil or water (oil quenching is preferred to reduce cracking risk). 40cr steel pipes tempering purp...