1 Romania 
1 UAE 
1 Germany 
abrasion resistance alumina ceramic thread guide Photos Catalog - page 99 - WorldBid B2B Market
-
Slip Resistance Tester Astm F2913Equipment - Standard Group (Hong Kong) Co., Ltd. - China - October 21, 2025 - contact company for priceintroduction slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequently result from major slips and slipping can also be the initial cause for a range of other...
-
Shoe Sole Heat Resistance TesterEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 21, 2025 - contact company for pricereference standard en iso 20344. en iso 8772-1. gb/t 20991-2007. ansi, jis, csa, gb12017-1989. ld50-1994 and other standards main uses the sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finis...
-
Scratch Resistance TesterEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 22, 2025 - contact company for priceProduct Introduction: The Scratch 5.5 Machine is a scratch and scratch test instrument for macroscopic scratches. It is a research-grade tribology instrument for polymers, coatings, films and bulk materials that explores scratches, scratches and othe...
-
Face Mask Airflow Resistance Measurement Test MachineFabric - Other - Standard International Group (HK) Limited - China - October 22, 2025 - contact company for priceStandards: GB19083-2010 technical requirements for medical protective masks Applications： Quality control in production process. Testing in research and development. Fabric Airflow resistance tester also known as air resistance tester is mainly used ...
-
Gloves Cut Resistance Testing ChamberFabric - Other - Standard International Group (HK) Limited - China - October 22, 2025 - contact company for priceTest Criteria: EN ISO 20344. GB / T 20991. EN 388. EN 340 Detection Principle: A rotating circular blade is cut and placed on a dedicated sample device. The blade is reciprocated under a specified load, automatically counted, the test is automaticall...
-
Automatic Voltage Internal Resistance TesterEquipment - Standard International Group (HK) Limited - China - October 24, 2025 - contact company for priceStandard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 3611: Calibration of Measuring Instruments – Verification of Linear Measuring Instruments IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliabi...
-
Photovoltaic Module Insulation Resistance TesterEquipment - Standard International Group (HK) Limited - China - October 24, 2025 - contact company for priceStandard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovoltaic Modules ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories CE Certif...
-
Epoxy Anti Corrosion Dual Resistance Powder Coating For Coal MinesChemicals - Standard International Group (HK) Limited - China - October 24, 2025 - 1.00 Dollar US$Product Introduction: This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, combining the advantages of intrinsic and doped conductivity. It is specifically designed for conducti...
-
Safety Helmets Impact And Penetration Resistance TesterEquipment - Standard International Group (HK) Limited - China - October 26, 2025 - contact company for priceStandard GB/T 2811-2019 (China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX (Testing methods for impact absorption and penetration resistance of helmets) ISO 6220-2 (Road vehicles – Restraint systems for occupants ...
-
Goggles Puncture Resistance Testing MachineEquipment - Standard International Group (HK) Limited - China - October 26, 2025 - contact company for priceApplicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified in the standard and act on the surface of helmet or goggles, so as to determine the ability of helmet or goggle...
-
Geomembrane Environmental Stress Cracking Resistance TesterEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 27, 2025 - contact company for priceScope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. During the test, the dumbbell sample with notch prepared in advance is placed in the thermostatic surfactant ...
-
Vertical Low Temperature Cold Resistance Testing MachineEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 27, 2025 - contact company for priceProduct description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to understand the material or finished products to adapt to low temperature climate or cold areas, this machi...
-
Yellowing Resistance Test ChamberEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceApplicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white products, such as upper and bottom materials for shoes, to approximate sunlight and ultraviolet light. Accord...
-
Environmental Stress Cracking Resistance TesterEquipment - Standard Group (Hong Kong) Co., Ltd. - China - October 28, 2025 - contact company for priceStandard ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics. ISO 22088-3: Configurable for notched specimen testing in aggressive media. Product Advantages 1. Unmatched Throughput 460-Sa...
-
Micronized Wax Used To Enhance Wear ResistanceChemicals - Syntop Chemical Co., Ltd. - China - October 28, 2025 - check with company for priceMicronized wax, through core-shell structure design and functionalisation, can significantly enhance the abrasion resistance of products such as coatings and inks. Below are specific application scenarios and mechanisms of action: Coatings Sector Acr...
-
Catheter Airflow Resistance Tester Yy0461Equipment - Standard Group (Hong Kong) Co., Ltd. - China - October 29, 2025 - contact company for priceCompliance Standards YY0461 - 2003. etc. Main Uses The catheter airflow resistance tester is an important tool for evaluating the resistance of gas flow in catheters. It is specifically designed to measure the airflow resistance inside medical device...
-
Automotive Wire Scratch Resistance TesterEquipment - Testing / Measuring - Standard International Group (HK) Limited - China - October 30, 2025 - check with company for priceStandards The tester adheres to global standards for material abrasion testing, including: ISO 6722-1 (Road vehicles – Electrical cables – Test methods for abrasion resistance) SAE J2394 (Standard test for electrical resistance of automotive wire ins...
-
Scratch Resistance Testing MachineEquipment - Testing / Measuring - Standard International Group (HK) Limited - China - October 30, 2025 - check with company for priceProduct Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of automobile wires to determine the wear resistance of automobile wires Applicable standards: JB/T 8139-1...
-
Molten Metal Penetration Resistance TesterEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for priceStandard ISO 9185 (Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955 (Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact With Molten Substances) EN ISO 11612 (Protec...
-
Resistance Tester For Molten Metal Droplet Splash Impact PerformanceEquipment - Standard International Group (HK) Limited - China - October 30, 2025 - contact company for pricePerformance and Standards: This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing standards such as ISO 9150. EN 348. GB/T 17599. AQ6103. GB 8965.2. etc. It is applicable to the protective ...